Lanberg DSP2-1008-12V, 8x1GE

Accessories included -
Application - Home and small office
Category - Root/Electronics/Networks and communication/Switchers
Chassis type - Desktop
Console port - No
Data transmission - MAC address table - 4000 entries
Data transmission - Switching capacity - 16 Gbit/s
Description - Lanberg DSP2-1008 is a compact, unmanaged desktop switch equipped with 8 x Gigabit Ethernet RJ-45 ports. The device itself is small and handy with Plug & Play operation principles. Product provides switching functions for 8 x 10/100/1000 Mbps RJ-45 ports with automatic connection negotiation and MDI-MDIX support. The distinctive feature of the DSP1 and DSP2 series switches is the use of universal 12V power supply, used in many other IP and CCTV surveillance, alarm, security, and IT devices. With this solution, the end-users, ISPs, or installers are not forced to use the default power supply, thus the greater freedom in regards to delivering the power to the switch using this voltage. The benefits of using 12V power include: - 12V voltage is present in alarm systems and older CCTV solutions. In such cases, a collective power supply is used, which eliminates the need for any additional energy sources and allows for easy replacement of the main power adapter in case of failure, - There are many manufacturers on the market offering 12V buffer power supplies offering a jack cable. Such small devices provide power to compact products such as routers and switches. 12V used in the DSP2 series allows you to connect all sorts of buffer power supplies to maintain the device's operation after a power outage, - Increased stability of the equipment and better current efficiency of the device through the use of higher voltage. Switch is an ideal solution for domestic use due to its modest size and silent passive cooling. On top of that, black color and elegant slim case fits to almost any interior. Moreover, device is suitable for office applications, including SOHO and SMB. Lanberg switch boasts adequate performance, meeting the requirements established by users in the switch segment. Automatic recognition and adaptation to the type of connected network cable (solid or strand) feature eliminates the requirement to use only one type of Ethernet cabling, as well as a need for uplink ports, allowing simultaneous reduction of unnecessary costs. The switch supports Half-Duplex and Full-Duplex mode for inter-device connections. Flow control feature allows data flow management, thus avoiding any data transmission blocks on the port when one of the receiving devices is unable to receive enough data. Lanberg desktop switch guarantees a combination of high-quality, automation and a range of features ensuring stable device operation without any excessive user intervention.
Design - LED indicators - LAN
Design - LED indicators - Power
Design - Product colour - Black
Designation - CE+WEEE
dimensionalWeight - 210
dimension depth - 75 mm
dimension height - 105 mm
Dimensions - 89 x 137 x 28 mm
dimension weight - 300 g
dimension width - 145 mm
ean - 5901969424171
Eans - 5901969424171
Fan - No
Forwarding mode - Store-and-forward
guarantee - 24
guarantee_type - normal
L2 features -
L3 features -
MAC address table size - 4000
Management, monitoring, configuration -
Management features - Power connector - 12V/0,5A
Management features - Switch type - Unmanaged
Name - Lanberg switch 8x 100Gb/s niezarządzalny 12V
name - Swich DSP2-1008-12V 8X 1GB/S DES. DSP2-1008-12
Network - 10G support - No
Network - Auto-negotiation - Yes
Network - Auto MDI/MDI-X - Yes
Network - Copper ethernet cabling technology - 1000BASE-T
Network - Full duplex - Yes
Network - Networking standards - IEEE 802.3ab
Network - Networking standards - IEEE 802.3i
Network - Networking standards - IEEE 802.3u
Network - Networking standards - IEEE 802.3x
Network architecture - GigabitEthernet
Number of 10/100 Mbps ports - 8
Number of 10/100/1000 Mbps ports - 8
Number of 10Gb ports - None
Number of COMBO ports - None
Number of PoE+ ports - None
Number of PoE ports (PoE & PoE+) - None
Number of QSFP+ ports - None
Number of SFP+ ports - None
Number of SFP ports - None
Operational conditions - Operating relative humidity (H-H) - 0 - 85%
Operational conditions - Operating temperature (T-T) - 0 - 40 °C
Operational conditions - Storage relative humidity (H-H) - 0 - 85%
Operational conditions - Storage temperature (T-T) - 0 - 40 °C
Other features -
Other functions -
Packaging data - AC adapter included - Yes
Packaging data - Package type - Box
Packaging data - Quick start guide - Yes
Ports & interfaces - Basic switching RJ-45 Ethernet ports quantity - 8
Ports & interfaces - Basic switching RJ-45 Ethernet ports type - Gigabit Ethernet (10/100/1000)
Power - Output voltage - AC: 100-240 V, DC: 12 V
Power - Power supply included - Yes
Power consumption - 4.53 W
Power over Ethernet (PoE) - Power over Ethernet (PoE) - No
Power supply - AC, AC/DC, network (230V), external
Power supply - External
producer - Lanberg
Producer - LANBERG
producerCode - DSP2-1008-12V
ProducerCode - DSP2-1008-12V
productName - LANBERG SWITCH DSP2-1008-12V (8-PORT, 12V, 1GB/S)
productSize - Normal
QoS -
Security -
ShortDescription - switch/przełącznik | 8 portów 1Gb/s | Desktop | 12V
sizeX - 150
sizeY - 100
sizeZ - 70
Stackability - No
Supported protocols and standards - IEEE 802.3ab 1000Base-T, IEEE 802.3i 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3x (Flow-Control)
Support for Jumbo frames - No
Switch class - Unmanaged
Switch layer - L2
Throughput - 16 GB/s
vendpn - DSP2-1008-12V
VLAN -
warrantyLength - 24
warrantyType - G
Weight - 240 g
weight - 300
Weight & dimensions - Depth - 89 mm
Weight & dimensions - Height - 28 mm
Weight & dimensions - Width - 137 mm