ID: 1047181
Product code: AGAMMIXS50L-2T-C
In stock 1 units
Warranty: 3 years
ADATA XPG GAMMIX S50 Lite, 2TB, M.2 Gen4 x4
Picture may differ from actual product, there can be accessories and parts not supplied with the actual product.
Delivery options
- Delivery to Smartpost parcel locker 1.99 €: {delivery_2_txt_full}
- Delivery to Omniva parcel locker 1.99 €: 29.11.2024
- Courier delivery 3.99 €: 29.11.2024
Main product parameters All parameters
- Capacity: 2 TB
- Type: NVMe
- Read speed (sequential): 3900 MB/s
- Write speed (sequential): 3200 MB/s
- Form factor: M.2 80mm (2280)
- Interface: PCIe 4.0 x4
Description
This Adata brand SSD has a 2 TB capacity and a M.2 80mm (2280) format.
The disk is equipped with the currently most advanced and compact M.2 connection port.
This is an NVME type SSD drive. It uses the PCI-e protocol, which allows data to be transmitted over multiple lines at the same time. This type of drive is ideal for processing large files, gaming, video editing, and other resource-intensive tasks.
The read speed for this SSD drive reaches 3900 MB/s. However, it's crucial to note - if the "fast" drives are not provided with adequate cooling, they may not be able to operate at the speed indicated by the manufacturer.
The writing speed for this SSD disk reaches 3200 MB/s. Without a suitable cooling mechanism, "fast" disks may not be able to achieve the performance indicators promised by the manufacturer.
This SSD drive is equipped with a heatsink or a cooler, which helps to keep the memory chips cool and ensure stable writing and reading speed during prolonged operation. Even if a "fast" drive without a heatsink is chosen, in 99% of cases the system board will be equipped with an M.2 slot cooler.
This is an SSD disk in the M.2 80mm (2280) format.
This SSD drive interface is PCIe 4.0 x4. If you insert this drive into an older interface slot, the speed of the drive will decrease, as the drive will not have sufficient data transfer speed (Bandwidth).
Basic information
Capacity
2 TB
The HDD capacity in Gigabytes indicates how much information can be stored by the HDD. The capacity of the HDD is fixed and cannot be increased after buying the HDD. Therefore, upon buying the HDD you should verify its compliance with your current volume requirements and provides a reserve for future needs.
Type
: NVMe
Read speed (sequential)
3900 MB/s
Sequential read speed or the mean data reading speed is the most important criterion of the high-speed operation of the SSD. The data from the SSD will be read much more often than written to it because the operating system stores the processed data in the RAM in most cases.
If you want the reading speed of the purchased SSD to exceed the speed of the classic HDD considerably you should choose the SSD with the reading speed of 200 MB/s or above. The additional increase in the performance will be achieved on the account of the data search (SeekTime) which is of much higher level with SSDs than any HDD.
Write speed (sequential)
3200 MB/s
The writing speed is almost as important as the reading speed. Also this parameter determines the performance of the SSD, however, as the writing to the disc happens not as often as the data reading and average user will find it subjectively difficult to distinguish between any speed above 100 MB/s and higher indices, except the cases when the SSD is used in a server, for audio/video recording, etc.
Functionality
Radiators
: Ir
Lighting
: Nav
Ports and equipment
Form factor
M.2 80mm (2280)
Thanks to the small size provided by the SSD technology the standard size of the discs is 2.5", and it is suitable for an average portable computer. It is possible to install the 2.5" disc in the desktop computer if the transition 2.5" -> 3.5" is used, and this transition can be bought at a low cost at TopPC.ee section"Adapteri". The discs with the format 2.5" + 3.5" have this transition included.
1.8" discs are intended for the ultra-compact class portable computers.
PCI-Express SSDs are intended for desktop computers with a free PCI-Express plug available. This technology in most cases is used for ensuring the performance that exceeds the possibilities of other types of connections.
Interface
: PCIe 4.0 x4
Interface
M.2
SSDs with SATAII and SATAIII connection are compatible with the connections of both types in the motherboard. Still, it has to be taken into account that the motherboard SATAII connection can provide maximum about 300 MB/s transmission capacity which can reduce the actual transmission capacity of the SSDs whose reading and/or writing speed exceeds this level to the capacity limits of the SATAII.
The situation is similar with the PCI-Express and SATAIII connection slots. Although the SATAIII standard can provide up to 600 MB/s data transmission capacity there are SSDs with the speed exceeding this limit, in this case the manufacturer chooses the PCI-Express connection slot with a higher transmission capacity. The PCI-Express discs cannot be connected to the portable computer.
Specifikācija
Memory type
: TLC (Triple-Level Cell)
Random Read IOPS
: 380K
Random Write IOPS
: 540K
Endurance (TBW)
: 740 TB
More detailed specification
Brand - XPG
BrandPartCode - AGAMMIXS50L-2T-C
Category - Internal Solid State Drives
Code - AGAMMIXS50L-2T-C
Design > SSD form factor - M.2 2280
EAN - 4710273778877
Features - Certification - CE, FCC, BSMI, KC, RCM, Morocco, EAC
Features - Component for - PC
Features - ECC - Yes
Features - End-to-End Data Protection - Yes
Features - Hardware encryption - Yes
Features - Interface - PCI Express 4.0
Features - Mean time between failures (MTBF) - 2000000 h
Features - Memory type - 3D NAND
Features - NVMe - Yes
Features - NVMe version - 1.4
Features - PCI Express interface data lanes - x4
Features - Random read (4KB) - 490000 IOPS
Features - Random write (4KB) - 540000 IOPS
Features - Read speed - 3900 MB/s
Features - Security algorithms - 256-bit AES
Features - Sequential read speed (AS SSD) - 3300 MB/s
Features - Sequential read speed (ATTO) - 3800 MB/s
Features - Sequential read speed (CDM) - 3900 MB/s
Features - Sequential write speed (AS SSD) - 2800 MB/s
Features - Sequential write speed (ATTO) - 3200 MB/s
Features - Sequential write speed (CDM) - 3200 MB/s
Features - SSD capacity - 2 TB
Features - SSD form factor - M.2
Features - TBW rating - 1480
Features - Write speed - 3200 MB/s
GTIN - 4710273778877
Link - https://www.xpg.com/us/feature/681/
Logistics data - Harmonized System (HS) code - 84717070
LongDesc - Take advantage of PCIe Gen4x4, the latest iteration of the PCIe interface, with the XPG GAMMIX S50 Lite PCIe Gen4x4 M.2 2280 solid state drive. Delivering read/write speeds of up to 3900/3200MB per second and sporting a host of other great features, the GAMMIX S50 Lite will bring your system to the next level.Next-Gen Performance with PCIe 4.0With PCIe Gen4x4, enjoy a new level of gaming performance with sustained read/write speeds of up to 3900/3200/MB per second. That's up to eight times faster than a SATA SSD. What's more, it's backward compatible with PCIe 3.0.Born to Perform- Compatible with NVMe 1.4- A new leap forward in capacity, efficiency, and durability with next-gen 3D NAND Flash memory- M.2 2280 specifications: supports PCIe 4.0- Ideal for gamers, overclockers, and PC enthusiastsCool Even at Peak PerformanceSporting a robust high-temperature resistant aluminum heatsink, the GAMMIX S50 Lite gets rid of heat effectively. So effective in fact it is able to reduce temperatures by up to 20 percent. Plus, the heatsink looks amazing too with its streamlined surface and ridged geometric lines.Empowering Your PassionsThe GAMMIX S50 Lite uses Dynamic SLC Caching and DRAM Cache Buffer to achieve random read/write speeds of up to 490K/540K IOPS. Whether it's video editing, animation, or gaming, this SSD has you covered!Lots of Storage Space. Very Durable.Equipped with 3D NAND Flash memory, the GAMMIX S50 Lite comes with higher capacities, up to 2TB, to store more games or files. What's more, an array of data protection and correction technologies ramp up its Total Bytes Written (TBW) rating for enhanced durability and a longer product lifespan.Comprehensive Protection. Data Accuracy.The GAMMIX S50 Lite supports Low Density Parity Check (LDPC) code technology to detect and fix a comprehensive range of data errors for accurate data transfers. In addition, with End-to-End (E2E) Data Protection, RAID Engine support, and AES 256-bit Encryption, the S50 Lite ensures your data is always safe.
LongProductName - 2TB, 3D NAND, M.2, PCIe Gen4 x4, 3900MB/s read, 3200MB/s write
LongSummaryDescription - XPG GAMMIX S50 Lite. SSD capacity: 2 TB, SSD form factor: M.2, Read speed: 3900 MB/s, Write speed: 3200 MB/s, Component for: PC
Name - ADATA | XPG GAMMIX S50 Lite | 2000 GB | SSD form factor M.2 2280 | Solid-state drive interface PCIe Gen4x4 | Read speed 3900 MB/s | Write speed 3200 MB/s
Operational conditions - Maximum operating temperature - 70 °C
Operational conditions - Operating shock - 1500 G
Operational conditions - Operating temperature (T-T) - 0 - 70 °C
Operational conditions - Storage temperature (T-T) - -40 - 85 °C
Package features > Embeeded battery - No
Package features > Gross depth (mm) - 85.00 mm
Package features > Gross height (mm) - 5.00 mm
Package features > Gross weight - 0.05 kg
Package features > Gross width (mm) - 25.00 mm
Package features > Packing quantity - 1.00 pc(s)
Package features > Palette Qty - 20000 pc(s)
Package features > Paper/Pasteboard - 40.00 g
Package features > Plastic (No PET) - 10.00 g
Package features > Tare weight (kg) - 0.04 kg
Package features > Volume (m3) - 0.00 m³
Package features > WEEE tax - No
Performance > Read speed - 3900 MB/s
Performance > Solid-state drive capacity - 2000 GB
Performance > Solid-state drive interface - PCIe Gen4x4
Performance > Write speed - 3200 MB/s
Producer product name - XPG GAMMIX S50 Lite
ProductName - GAMMIX S50 Lite
ShortSummaryDescription - XPG GAMMIX S50 Lite, 2 TB, M.2, 3900 MB/s
Technical details > Net weight - 0.01 kg
Technical details > Producer - ADATA
Title - XPG GAMMIX S50 Lite 2 TB M.2 PCI Express 4.0 NVMe 3D NAND
URL - https://www.xpg.com/en/feature/681/
Warranty - 36
Warranty - 36 month(s)
WarrantyInfo - 5 years
Weight & dimensions - Depth - 4.3 mm
Weight & dimensions - Height - 22 mm
Weight & dimensions - Weight - 10 g
Weight & dimensions - Width - 80 mm
BrandPartCode - AGAMMIXS50L-2T-C
Category - Internal Solid State Drives
Code - AGAMMIXS50L-2T-C
Design > SSD form factor - M.2 2280
EAN - 4710273778877
Features - Certification - CE, FCC, BSMI, KC, RCM, Morocco, EAC
Features - Component for - PC
Features - ECC - Yes
Features - End-to-End Data Protection - Yes
Features - Hardware encryption - Yes
Features - Interface - PCI Express 4.0
Features - Mean time between failures (MTBF) - 2000000 h
Features - Memory type - 3D NAND
Features - NVMe - Yes
Features - NVMe version - 1.4
Features - PCI Express interface data lanes - x4
Features - Random read (4KB) - 490000 IOPS
Features - Random write (4KB) - 540000 IOPS
Features - Read speed - 3900 MB/s
Features - Security algorithms - 256-bit AES
Features - Sequential read speed (AS SSD) - 3300 MB/s
Features - Sequential read speed (ATTO) - 3800 MB/s
Features - Sequential read speed (CDM) - 3900 MB/s
Features - Sequential write speed (AS SSD) - 2800 MB/s
Features - Sequential write speed (ATTO) - 3200 MB/s
Features - Sequential write speed (CDM) - 3200 MB/s
Features - SSD capacity - 2 TB
Features - SSD form factor - M.2
Features - TBW rating - 1480
Features - Write speed - 3200 MB/s
GTIN - 4710273778877
Link - https://www.xpg.com/us/feature/681/
Logistics data - Harmonized System (HS) code - 84717070
LongDesc - Take advantage of PCIe Gen4x4, the latest iteration of the PCIe interface, with the XPG GAMMIX S50 Lite PCIe Gen4x4 M.2 2280 solid state drive. Delivering read/write speeds of up to 3900/3200MB per second and sporting a host of other great features, the GAMMIX S50 Lite will bring your system to the next level.Next-Gen Performance with PCIe 4.0With PCIe Gen4x4, enjoy a new level of gaming performance with sustained read/write speeds of up to 3900/3200/MB per second. That's up to eight times faster than a SATA SSD. What's more, it's backward compatible with PCIe 3.0.Born to Perform- Compatible with NVMe 1.4- A new leap forward in capacity, efficiency, and durability with next-gen 3D NAND Flash memory- M.2 2280 specifications: supports PCIe 4.0- Ideal for gamers, overclockers, and PC enthusiastsCool Even at Peak PerformanceSporting a robust high-temperature resistant aluminum heatsink, the GAMMIX S50 Lite gets rid of heat effectively. So effective in fact it is able to reduce temperatures by up to 20 percent. Plus, the heatsink looks amazing too with its streamlined surface and ridged geometric lines.Empowering Your PassionsThe GAMMIX S50 Lite uses Dynamic SLC Caching and DRAM Cache Buffer to achieve random read/write speeds of up to 490K/540K IOPS. Whether it's video editing, animation, or gaming, this SSD has you covered!Lots of Storage Space. Very Durable.Equipped with 3D NAND Flash memory, the GAMMIX S50 Lite comes with higher capacities, up to 2TB, to store more games or files. What's more, an array of data protection and correction technologies ramp up its Total Bytes Written (TBW) rating for enhanced durability and a longer product lifespan.Comprehensive Protection. Data Accuracy.The GAMMIX S50 Lite supports Low Density Parity Check (LDPC) code technology to detect and fix a comprehensive range of data errors for accurate data transfers. In addition, with End-to-End (E2E) Data Protection, RAID Engine support, and AES 256-bit Encryption, the S50 Lite ensures your data is always safe.
LongProductName - 2TB, 3D NAND, M.2, PCIe Gen4 x4, 3900MB/s read, 3200MB/s write
LongSummaryDescription - XPG GAMMIX S50 Lite. SSD capacity: 2 TB, SSD form factor: M.2, Read speed: 3900 MB/s, Write speed: 3200 MB/s, Component for: PC
Name - ADATA | XPG GAMMIX S50 Lite | 2000 GB | SSD form factor M.2 2280 | Solid-state drive interface PCIe Gen4x4 | Read speed 3900 MB/s | Write speed 3200 MB/s
Operational conditions - Maximum operating temperature - 70 °C
Operational conditions - Operating shock - 1500 G
Operational conditions - Operating temperature (T-T) - 0 - 70 °C
Operational conditions - Storage temperature (T-T) - -40 - 85 °C
Package features > Embeeded battery - No
Package features > Gross depth (mm) - 85.00 mm
Package features > Gross height (mm) - 5.00 mm
Package features > Gross weight - 0.05 kg
Package features > Gross width (mm) - 25.00 mm
Package features > Packing quantity - 1.00 pc(s)
Package features > Palette Qty - 20000 pc(s)
Package features > Paper/Pasteboard - 40.00 g
Package features > Plastic (No PET) - 10.00 g
Package features > Tare weight (kg) - 0.04 kg
Package features > Volume (m3) - 0.00 m³
Package features > WEEE tax - No
Performance > Read speed - 3900 MB/s
Performance > Solid-state drive capacity - 2000 GB
Performance > Solid-state drive interface - PCIe Gen4x4
Performance > Write speed - 3200 MB/s
Producer product name - XPG GAMMIX S50 Lite
ProductName - GAMMIX S50 Lite
ShortSummaryDescription - XPG GAMMIX S50 Lite, 2 TB, M.2, 3900 MB/s
Technical details > Net weight - 0.01 kg
Technical details > Producer - ADATA
Title - XPG GAMMIX S50 Lite 2 TB M.2 PCI Express 4.0 NVMe 3D NAND
URL - https://www.xpg.com/en/feature/681/
Warranty - 36
Warranty - 36 month(s)
WarrantyInfo - 5 years
Weight & dimensions - Depth - 4.3 mm
Weight & dimensions - Height - 22 mm
Weight & dimensions - Weight - 10 g
Weight & dimensions - Width - 80 mm
