Lexar NS100, 1TB, SATA III, 2.5"

Picture may differ from actual product, there can be accessories and parts not supplied with the actual product.
ID: 683584 Product code: LNS100-1TRB
In stock >50 units
Warranty: 3 years
74.90 €
Delivery options
  • Delivery to Smartpost parcel locker 1.99 €: {delivery_2_txt_full}
  • Delivery to Omniva parcel locker 1.99 €: on Wednesday, 27.11.2024
  • Courier delivery 3.99 €: on Wednesday, 27.11.2024
Main product parameters All parameters
  • Capacity: 1 TB
  • Type: SATA
  • Read speed (sequential): 550 MB/s
  • Write speed (sequential): N/A
  • Form factor: 2.5"
  • Interface: SATA III (6Gb/s)
Description

Available for purchase, the Lexar 2.5" format SSD disk with a large volume of 1 TB.

This disk uses the standard SATA interface, which operates with traditional SATA data and power cables.

This disc uses SATA III technology - although it is an older protocol, the SATA type SSD disc is still very useful for everyday needs and in cases where you have to fit a certain budget.

This SSD disk read speed (Sequential read speed) is 550 MB/s. Keep in mind that "fast" disks without a proper cooling solution may not reach the speeds indicated by the manufacturer.

The write speed (Sequential write speed) of this SSD is . However, if adequate cooling is not provided, "fast" drives may not achieve the speeds guaranteed by the manufacturer.

This is an SSD disk in the 2.5" format.

This SSD drive interface is SATA III (6Gb/s). If you insert this drive into an older interface slot, the speed of the drive will decrease, as the drive will not have sufficient data transfer speed (Bandwidth).

Basic information
Capacity 1 TB
The HDD capacity in Gigabytes indicates how much information can be stored by the HDD. The capacity of the HDD is fixed and cannot be increased after buying the HDD. Therefore, upon buying the HDD you should verify its compliance with your current volume requirements and provides a reserve for future needs.
Type : SATA
Read speed (sequential) 550 MB/s

Sequential read speed or the mean data reading speed is the most important criterion of the high-speed operation of the SSD. The data from the SSD will be read much more often than written to it because the operating system stores the processed data in the RAM in most cases.

If you want the reading speed of the purchased SSD to exceed the speed of the classic HDD considerably you should choose the SSD with the reading speed of 200 MB/s or above. The additional increase in the performance will be achieved on the account of the data search (SeekTime) which is of much higher level with SSDs than any HDD.

Write speed (sequential) N/A

The writing speed is almost as important as the reading speed. Also this parameter determines the performance of the SSD, however, as the writing to the disc happens not as often as the data reading and average user will find it subjectively difficult to distinguish between any speed above 100 MB/s and higher indices, except the cases when the SSD is used in a server, for audio/video recording, etc.

Functionality
Radiators : Nav
Lighting : Nav
Ports and equipment
Form factor 2.5"

Thanks to the small size provided by the SSD technology the standard size of the discs is 2.5", and it is suitable for an average portable computer. It is possible to install the 2.5" disc in the desktop computer if the transition 2.5" -> 3.5" is used, and this transition can be bought at a low cost at TopPC.ee section"Adapteri". The discs with the format 2.5" + 3.5" have this transition included.

1.8" discs are intended for the ultra-compact class portable computers.

PCI-Express SSDs are intended for desktop computers with a free PCI-Express plug available. This technology in most cases is used for ensuring the performance that exceeds the possibilities of other types of connections.

Interface : SATA III (6Gb/s)
Interface SATA

SSDs with SATAII and SATAIII connection are compatible with the connections of both types in the motherboard. Still, it has to be taken into account that the motherboard SATAII connection can provide maximum about 300 MB/s transmission capacity which can reduce the actual transmission capacity of the SSDs whose reading and/or writing speed exceeds this level to the capacity limits of the SATAII.

The situation is similar with the PCI-Express and SATAIII connection slots. Although the SATAIII standard can provide up to 600 MB/s data transmission capacity there are SSDs with the speed exceeding this limit, in this case the manufacturer chooses the PCI-Express connection slot with a higher transmission capacity. The PCI-Express discs cannot be connected to the portable computer.

Specifikācija
Memory type : Nav norādīts
Random Read IOPS : Not indicated
Random Write IOPS : Not indicated
Endurance (TBW) : 512 TB
More detailed specification
Additional information in manufacturers website Lexar NS100, 1TB, SATA III, 2.5"
Box Weight Brutto (kg) - 0.76 kg
Category - Root/Electronics/PC parts/Hard drives
Category Code - SSM
Category_1 - Hard Drives and Pendrives
Category_2 - Internal Hard Drives - SATA - 2.5 inch
Code - LNS100-1TRB
Color - Not applicable
Combined (other) - 0.7000 g
Depth - 100.2 mm
Depth (mm) - 100.2 mm
Description -
Description - Lexar NS100 2.5” SATA III (6Gb/s) SSD
Design > SSD form factor - 2.5
Device Location - Internal
dimension depth - 15 mm
dimension height - 165 mm
Dimensions - 69.85mm x 100.2mm x 7mm
dimension weight - 65 g
dimension width - 105 mm
Disk type - SSD
Drive thickness - 7mm
Drive type - Internal
Drive Writes Per Day (DWPD) - 0.46
EAN - 843367117222
ean - 843367117222
EAN Code - 843367117222
Eans - 0843367117222
EAN_code - 0843367117222
External Color - Gray
External Data Bit Rate - 6 Gbps
Flash Memory Cell Technology - Triple-Level Cell
Form Factor - 2,5"
Form Factor - 2.5" 7mm
Form factor (width) - 2,5'' (SFF)
Full Description Line - SSD series NS100|1TB|SATA 3.0|Read speed 550 MBytes/sec|Form Factor 2,5"|Drive thickness 7mm
guarantee - 36
guarantee_type - normal
HDD capacity - 1 TB
HDD interface - SATA III - 6 Gb/s
Height - 7 mm
Height (mm) - 7 mm
Image - https://content.it4profit.com/pimg/s/resize/900x900x900x900/201023160013340892.jpg
Included Accessories - Īsa lietotāja rokasgrāmata
Link - https://www.lexar.com/portfolio_page/ssd-ns100/
Manufacturer - Lexar
Manufacturer_code - LNS100-1TRB
Maximum Non-Operating Ambient Temperature - 85 °C
Maximum Operating Ambient Temperature - 70 °C
Maximum Sequential Read Rate - 550 MB/s
Maximum Sequential Write Rate - 500 MB/s
Memory Technology - NAND Flash
Minimum Non-Operating Ambient Temperature - -40 °C
Minimum Operating Ambient Temperature - 0 °C
Model - NS100
Name - Lexar NS100 1TB
Name - Lexar SSD 1TB 500/550 NS100 SA3
Name - Lexar | SSD | NS100 | 1000 GB | SSD form factor 2.5 | SSD interface SATA III | Read speed 550 MB/s
name - SSD drive NS100 1TB SATA3 2.5 550/500MB/s
Nominal Weight - 34 g
Other features -
Package features > Embeeded battery - No
Package features > Gross depth (mm) - 168.00 mm
Package features > Gross height (mm) - 15.00 mm
Package features > Gross weight - 0.06 kg
Package features > Gross width (mm) - 105.00 mm
Package features > Packing quantity - 1 pc(s)
Package features > Palette Qty - 3265 pc(s)
Package features > Paper/Pasteboard - 23 g
Package features > PET - 1 g
Package features > Plastic (No PET) - 5 g
Package features > Tare weight (kg) - 0.03 kg
Package features > Volume (m3) - 0.00 m³
Package features > WEE classification - CL109:5:2017-04-01
Package features > WEEE tax - No
Package Type - Retail
Packs in Box - 10
Pack Weight Brutto (kg) - 0.06 kg
Pack Weight Netto (kg) - 0.04 kg
Performance > Data transfer rate - 6 Gbit/s
Performance > Read speed - 550 MB/s
Performance > Solid-state drive capacity - 1000 GB
Performance > Solid-state drive interface - SATA III
Pieces in pack - 1
producer - Lexar
Producer - Lexar
ProducerCode - LNS100-1TRB
Producer product family - SSD
Producer product name - NS100
ProductCard - https://content.it4profit.com/itshop/itemcard_cs.jsp?ITEM=200922081728224619&THEME=asbis&LANG=lv
ProductCategory - SSD
ProductCode - LNS100-1TRB
ProductDescription - Lexar® 1TB NS100 2.5” SATA (6Gb/s) Solid-State Drive, up to 550MB/s Read and 500 MB/s write, EAN: 843367117222
ProductType - SSD Client
Protection From Enviromental Effects - Shock Proof ConstructionVibration proof
Reading speed - 550 MB/s
Read speed - 550 MBytes/sec
SATA 3.0 Interface - Yes
Shipping Box Depth Shipping/Package Box Dimensions - 16.5 cm
Shipping Box Height Shipping/Package Box Dimensions - 1.5 cm
Shipping box quantity - 1
Shipping Box Weight Shipping/Package Box Dimensions - 0.07 kg
Shipping Box Width Shipping/Package Box Dimensions - 11 cm
Shock Tolerance Operating - 1500G @ 0.5ms
ShortDescription - 2.5'' | SSD | 1TBB |550/500 MB/s | Serial ATA3
SSD Capacity - 1TB
SSD series - NS100
Storage Capacity - 1 TB
Supports Data Channel - SATA III-600
TBW - 480 TB
Technical details > Net weight - 0.03 kg
Technical details > Producer - Lexar
Total Bytes Written (TBW) - 512 TB
Unit Box Height - 0.015
Unit Box Length - 0.165
Unit Box Width - 0.11
Unit Brutto Volume - 0.0002722 cubm
Unit Gross Weight - 0.07 kg
Unit Net Weight - 0.034 kg
Vendor - LEXAR
Vendor Homepage - lexar.com/en/product/lexar-ns100-2-5-sata-iii-6gb-s-ssd/
vendpn - LNS100-1TRB
Vibration Tolerance Operating - 20G @10-2000Hz
Warranty - 36
Warranty - 36 month(s)
Warranty - 36 months
Warranty Products Returnable - Yes
Warranty Term (month) - 36 mēneši
Warranty validation Criteria - Serial Number
Weight - 0,23
Weight - 34 g
Width - 69.85 mm
Width (mm) - 69.85 mm
Writing speed - 500 MB/s
74.90 €
Lexar NS100, 1TB, SATA III, 2.5"
Intel technology provider Platinum 2020
All categories