ID: 967752
Product code: SEDC600M/3840G
In stock 27 units
Warranty: 3 years
Kingston DC600M 3.84TB
Picture may differ from actual product, there can be accessories and parts not supplied with the actual product.
Delivery options
- Delivery to Smartpost parcel locker 1.99 €: {delivery_2_txt_full}
- Delivery to Omniva parcel locker 1.99 €: on Monday, 09.12.2024
- Courier delivery 3.99 €: on Monday, 09.12.2024
Main product parameters All parameters
- Capacity: 3.84TB
- Type: SATA
- Read speed (sequential): 560 MB/s
- Write speed (sequential): 530 MB/s
- Form factor: 2.5"
- Interface: SATA III (6Gb/s)
Description
Available for purchase, the Kingston 2.5" format SSD disk with a large volume of 3.84TB.
The drive is equipped with the classic SATA port, which requires standard SATA data and power cables.
This is a SATA type SSD disk. It uses the SATA III protocol, which is older technology, however SATA is still a good option for everyday use and budget solutions.
This SSD disk read speed (Sequential read speed) is 560 MB/s. Keep in mind that "fast" disks without a proper cooling solution may not reach the speeds indicated by the manufacturer.
530 MB/s - this SSD drive is capable of achieving such data writing speed. The speed parameters promised by the manufacturer may not be reached if the "fast" disk is not provided with an appropriate cooling system.
This is an SSD disk in the 2.5" format.
This SSD drive interface is SATA III (6Gb/s). If you insert this drive into an older interface slot, the speed of the drive will decrease, as the drive will not have sufficient data transfer speed (Bandwidth).
Basic information
Capacity
3.84TB
The HDD capacity in Gigabytes indicates how much information can be stored by the HDD. The capacity of the HDD is fixed and cannot be increased after buying the HDD. Therefore, upon buying the HDD you should verify its compliance with your current volume requirements and provides a reserve for future needs.
Type
: SATA
Read speed (sequential)
560 MB/s
Sequential read speed or the mean data reading speed is the most important criterion of the high-speed operation of the SSD. The data from the SSD will be read much more often than written to it because the operating system stores the processed data in the RAM in most cases.
If you want the reading speed of the purchased SSD to exceed the speed of the classic HDD considerably you should choose the SSD with the reading speed of 200 MB/s or above. The additional increase in the performance will be achieved on the account of the data search (SeekTime) which is of much higher level with SSDs than any HDD.
Write speed (sequential)
530 MB/s
The writing speed is almost as important as the reading speed. Also this parameter determines the performance of the SSD, however, as the writing to the disc happens not as often as the data reading and average user will find it subjectively difficult to distinguish between any speed above 100 MB/s and higher indices, except the cases when the SSD is used in a server, for audio/video recording, etc.
Functionality
Radiators
: Nav
Lighting
: Nav
Ports and equipment
Form factor
2.5"
Thanks to the small size provided by the SSD technology the standard size of the discs is 2.5", and it is suitable for an average portable computer. It is possible to install the 2.5" disc in the desktop computer if the transition 2.5" -> 3.5" is used, and this transition can be bought at a low cost at TopPC.ee section"Adapteri". The discs with the format 2.5" + 3.5" have this transition included.
1.8" discs are intended for the ultra-compact class portable computers.
PCI-Express SSDs are intended for desktop computers with a free PCI-Express plug available. This technology in most cases is used for ensuring the performance that exceeds the possibilities of other types of connections.
Interface
: SATA III (6Gb/s)
Interface
SATA
SSDs with SATAII and SATAIII connection are compatible with the connections of both types in the motherboard. Still, it has to be taken into account that the motherboard SATAII connection can provide maximum about 300 MB/s transmission capacity which can reduce the actual transmission capacity of the SSDs whose reading and/or writing speed exceeds this level to the capacity limits of the SATAII.
The situation is similar with the PCI-Express and SATAIII connection slots. Although the SATAIII standard can provide up to 600 MB/s data transmission capacity there are SSDs with the speed exceeding this limit, in this case the manufacturer chooses the PCI-Express connection slot with a higher transmission capacity. The PCI-Express discs cannot be connected to the portable computer.
Specifikācija
Memory type
: TLC (Triple-Level Cell)
Random Read IOPS
: Not indicated
Random Write IOPS
: Not indicated
Endurance (TBW)
: 7008 TB
More detailed specification
ARTIKEL1 - 3840G DC600M 2.5IN SATA SSD
ARTIKEL2 - ENTERPRISE (MIXED-USE)
Brand - Kingston Technology
BrandPartCode - SEDC600M/3840G
Breite - 0
Category - Internal Solid State Drives
Category - Root/Electronics/PC parts/Hard drives
Category 1 - SSDs
Category 2 - Interne SSDs
Category Code - SFM
Category_1 - Hard Drives and Pendrives
Category_2 - Internal Hard Drives - SATA - 2.5 inch
category_en - Computers & Components > Computer components > Hard Drives > SSD
category_lv - Datortehnika > Datoru komponentes > Cietie diski > SSD
category_ru - Datortehnika > Datoru komponentes > Cietie diski > SSD
Code - SEDC600M/3840G
Color - Not applicable
Depth - 100.1 mm
Description - DC600M The Kingston DC600M is a 4th generation SATA 3.0 6Gbps SSD with 3D TLC NAND designed for data centers and mixed workloads. The DC600M is designed for use in heavy-duty rack servers and includes built-in hardware-based power loss (PLP) protection. Thanks to the use of capacitors in the DC600M drive, power failure protection reduces the risk of data loss and ensures proper initialization of the drive after power is restored. The DC600M provides latency and I/O consistency for system integrators, hyperscale data centers, and cloud service providers. Drives with a capacity of 480GB-7680GB are offered to meet any data storage requirements.
Description - Kingston’s DC600M SSD is a fourth-generation data center SATA 3.0, 6Gbps SSD with 3D TLC NAND intended for “mixed use” workloads. The DC600M is suited for use in high-volume rack-mount servers and includes hardware-based on-board PLP. Via power loss capacitors, DC600M protects data against unexpected power failure to reduce the possibility of data loss and ensure that the drive will successfully re-initialise on the next power-up of the system. DC600M is designed to deliver latency and IOPS consistency for system integrators, hyperscale data centers and cloud service providers.
description_en - Kingston Technology DC600M
SSD capacity: 3.84 TB
Teurobody disk form factor: 2.5"
Read speed: 560 MB/s
Write speed: 530 MB/s
Data transfer rate: 6 Gbit/s
Accessories for: Server/worker. station
description_lv - Kingston Technology DC600M
SSD ietilpība: 3,84 TB
Teurobody diska formas koeficients: 2,5 collas
Lasīšanas ātrums: 560 MB/s
Rakstīšanas ātrums: 530 MB/s
Datu pārraides ātrums: 6 Gbit/s
Piederumi: Serverim/darbiniekam. stacija
description_ru - Kingston Technology DC600M Объем SSD: 3,84 TB
форм-фактор тевродотельного диска: 2.5"
Скорость считывания: 560 MB/s
Скорость записи: 530 MB/s
Скорость передачи данных: 6 Gbit/s
Комплектующие для: Сервер/раб. станция
Design > SSD form factor - 2.5"
dimensionalWeight - 46
dimension depth - 20 mm
dimension height - 190 mm
Dimensions - 69.9mm x 100mm x 7mm
dimension weight - 100 g
dimension width - 130 mm
Disk type - SSD
Drive thickness - 7mm
Drive type - Internal
DWPD - 1
EAN - 740617334975
ean - 740617334975
EAN - 0740617334975
EANCode - 0740617334975
Eans - 740617334975
EAN_code - 0740617334975
Features - Component for - Server/workstation
Features - Data transfer rate - 6 Gbit/s
Features - H/W PLP function - Yes
Features - Hardware encryption - No
Features - Hot-Plug support - Yes
Features - Interface - Serial ATA III
Features - Mean time between failures (MTBF) - 2000000 h
Features - Memory type - 3D TLC NAND
Features - Random read (4KB) - 94000 IOPS
Features - Random write (4KB) - 59000 IOPS
Features - Read latency - 200 µs
Features - Read speed - 560 MB/s
Features - SSD capacity - 3.84 TB
Features - SSD form factor - 2.5"
Features - Target workload - Mixed Use (MU)
Features - TBW rating - 7008
Features - Use conditions - Server/Enterprise
Features - Write latency - 30 µs
Features - Write speed - 530 MB/s
Form Factor - 2,5"
Form factor (width) - 2,5'' (SFF)
Full Description Line - SSD series DC600M|3.84TB|SATA|Technology 3D TLC|Write speed 530 MBytes/sec|Read speed 560 MBytes/sec|Form Factor 2,5"|TBW 7008 TB|DWPD 1|MTBF 2000000 hours|Drive thickness 7mm
Gewicht - 0
gross_weight - 0.2 kg
GRUPPE1 - Hard Drive/Optical
GRUPPE2 - Solid State Drive
GTIN - 0740617334975
GTIN - 740617334975
guarantee - 60
guarantee_type - normal
HDD capacity - 3.84 TB
HDD interface - SATA III - 6 Gb/s
Height - 7 mm
HERSTELLER - KINGSTON
Hoehe - 0
HSTNUMMER - SEDC600M/3840G
Laenge - 0
Link - https://www.kingston.com/en/ssd/dc600m-data-center-solid-state-drive?capacity=3.84tb
Logistics data - Country of origin - China, Taiwan
Logistics data - Master (outer) case gross weight - 1.01 kg
Logistics data - Master (outer) case height - 69.9 mm
Logistics data - Master (outer) case length - 203.2 mm
Logistics data - Master (outer) case width - 135.9 mm
Logistics data - Products per master (outer) case - 10 pc(s)
LongDesc - Kingston’s DC600M and DC600ME SSDs are fourth-generation data center SATA 3.0, 6Gbps SSDs utilising 3D TLC NAND intended for “mixed use” server workloads. Both are well suited for a wide variety of server applications and include on-board power loss protection via hold-up capacitors. DC600M and DC600ME are designed to protect data against unexpected power failure and to ensure the drive will successfully reinitialise on the next power-up of the system. Designed to deliver low latency and IO consistency for system integrators, hyperscale data centers and cloud service providers. DC600ME features AES 256-bit encryption and supports TCG OPAL 2.0 security standards. Capacities available from 480GB–7.68TB* to meet your data storage requirements.Designed for data center environments Optimised to meet the high demands of server RAID applications with low latency and IO consistency as the key design criteria.Hardware-based PLPPower loss capacitors to protect user data against unexpected power loss and enhance performance.Delivers excellent quality of service (QoS)*Optimised performance predictability to meetservice-level agreements (SLAs).AES 256-bit Encryption with DC600ME Protect sensitive data with support for AES 256-bit hardware-based encryption and TCG Opal 2.0 security standards with DC600ME. Capacities up to 7.68TB Upgrade and manage storage with capacities up to 7.68TB.*
LongProductName - 3840G DC600M (Mixed-Use) 2.5” Enterprise SATA SSD
LongSummaryDescription - Kingston Technology 3840G DC600M (Mixed-Use) 2.5” Enterprise SATA SSD. SSD capacity: 3.84 TB, SSD form factor: 2.5", Read speed: 560 MB/s, Write speed: 530 MB/s, Data transfer rate: 6 Gbit/s, Component for: Server/workstation
Manufacturer - Kingston
Manufacturer_code - SEDC600M/3840G
Model - DC600M
Model - SEDC600M/3840G
MPN - SEDC600M/3840G
MTBF - 2e+006 hours
Name - Ent. 2,5" 3.84TB Kingston DC600M
Name - Kingston DC600M 3840 GB, SSD (SATA 6 Gb/s, 2.5 design)
Name - Kingston DC600M | 3840 GB | SSD form factor 2.5" | Solid-state drive interface SATA Rev. 3.0 | Read speed 560 MB/s | Write speed 530 MB/s
Name - Kingston SSD DC600M 3840GB
name - SSD drive DC600M 3840GB
NAND flash technology - 3D TLC
Operational conditions - Non-operating vibration - 20 G
Operational conditions - Operating temperature (T-T) - 0 - 70 °C
Operational conditions - Operating vibration - 2.17 G
Operational conditions - Storage temperature (T-T) - -40 - 85 °C
Other features -
Package features > Embeeded battery - No
Package features > Gross depth (mm) - 70.00 mm
Package features > Gross height (mm) - 7.00 mm
Package features > Gross width (mm) - 100.00 mm
Package features > Packing quantity - 1.00 pc(s)
Package features > Palette Qty - 6993 pc(s)
Package features > Paper/Pasteboard - 40.00 g
Package features > Plastic (No PET) - 10.00 g
Package features > Tare weight (kg) - 0.05 kg
Package features > Volume (m3) - 0.00 m³
Package features > WEEE tax - No
Packaging data - Package depth - 9.1 mm
Packaging data - Package height - 184.2 mm
Packaging data - Package weight - 93.2 g
Packaging data - Package width - 129.5 mm
Performance > Read speed - 560 MB/s
Performance > Solid-state drive capacity - 3840 GB
Performance > Solid-state drive interface - SATA Rev. 3.0
Performance > Write speed - 530 MB/s
Power - Power consumption (average) - 1.45 W
Power - Power consumption (idle) - 1.3 W
Power - Power consumption (read) - 1.6 W
Power - Power consumption (write) - 3.6 W
producer - Kingston
Producer - Kingston
producerCode - SEDC600M/3840G
ProducerCode - SEDC600M/3840G
ProductName - 3840G DC600M (Mixed-Use) 2.5” Enterprise SATA SSD
productName - Kingston Technology 3840G DC600M (Mixed-Use) 2.5” Enterprise SATA SSD
productSize - Normal
Random read IOPS (max) - 94 K
Random write IOPS (max) - 59 K
Reading speed - 560 MB/s
Read speed - 560 MBytes/sec
SATA Interface - Yes
Shipping Box Depth Shipping/Package Box Dimensions - 18 cm
Shipping Box Height Shipping/Package Box Dimensions - 1 cm
Shipping box quantity - 1
Shipping Box Weight Shipping/Package Box Dimensions - 0.09 kg
Shipping Box Width Shipping/Package Box Dimensions - 13 cm
ShortDescription - 2.5'' | SSD | 3840GB | 560/530MB/s | Serial ATA 3 | 7mm
ShortSummaryDescription - Kingston Technology 3840G DC600M (Mixed-Use) 2.5” Enterprise SATA SSD, 3.84 TB, 2.5", 560 MB/s, 6 Gbit/s
sizeX - 180
sizeY - 130
sizeZ - 10
SSD Capacity - 3.84TB
SSD series - DC600M
Stck_Kart - 0
Stck_Pal - 0
Storno - Y
TBW - 7008 TB
TBW - 7008 TB
Technical details > Gross weight - 0.14 kg
Technical details > Net weight - 0.09 kg
Technical details > Producer - Kingston
Technical details > Producer product name - DC600M
Technical_details - The Kingston DC600M SSD is a 4th generation SATA 3.0, 6Gbps data center SSD with 3D TLC NAND intended for mixed workloads. The DC600M is suitable for use in high-volume rackmount servers and features hardware-based on-board PLP. Using power failure capacitors, the DC600M protects data from unexpected power outages to reduce the risk of data loss and ensure that the drive is successfully reinitialized the next time the system is turned on. The DC600M is specifically designed to provide system integrators, hyperscale data centers and cloud service providers with consistent latency and IOPS. Item no.: 1916730 Type SSD EAN 0740617334975 Manufacturer no. SEDC600M/3840G DC600M series Design 2.5 inches Capacity 3.84TB Interface 1x SATA/600 Power connector 15-pin power connector Internal interface SATA Data transfer rate reading 560 MB/s Write 59,000 Chip type TLC Power consumption resting 1.3 W IOPS Read 94,000 MTBF 2,000,000 hours TBW 7,008 TB Feature power failure protection, namespace management support (up to 64 namespaces) Dimensions Width: 69.9mm x Height: 7mm x Depth/Length: 100mm Weight 92 grams
Title - Kingston Technology 3840G DC600M (Mixed-Use) 2.5” Enterprise SATA SSD
title_en - Kingston DC600M SSD Disk 3840GB
title_lv - Kingston DC600M SSD Disks 3840GB
title_ru - Kingston DC600M SSD Диск 3840GB
Unit Box Height - 0.01
Unit Box Length - 0.18
Unit Box Width - 0.13
Unit Brutto Volume - 0.000234 cubm
Unit Gross Weight - 0.09 kg
Unit Net Weight - 0.072 kg
URL - https://www.kingston.com/
Vendor Homepage - www.kingston.com/unitedkingdom/en/ssd/dc600m-data-center-solid-state-drive?capacity=3.84tb
vendpn - SEDC600M/3840G
Warranty - 60
Warranty - 60 month(s)
Warranty - 60L months
WarrantyInfo - Limited 5-year warranty with free technical support
warrantyLength - 60
warrantyType - G
Weight - 0,09
Weight - 0.1
weight - 0.15 kg
Weight - 71 g
weight - 90
Weight & dimensions - Depth - 100.1 mm
Weight & dimensions - Height - 70 mm
Weight & dimensions - Weight - 71 g
Weight & dimensions - Width - 69.9 mm
Width - 69.9 mm
Write speed - 530 MBytes/sec
Writing speed - 530 MB/s
ARTIKEL2 - ENTERPRISE (MIXED-USE)
Brand - Kingston Technology
BrandPartCode - SEDC600M/3840G
Breite - 0
Category - Internal Solid State Drives
Category - Root/Electronics/PC parts/Hard drives
Category 1 - SSDs
Category 2 - Interne SSDs
Category Code - SFM
Category_1 - Hard Drives and Pendrives
Category_2 - Internal Hard Drives - SATA - 2.5 inch
category_en - Computers & Components > Computer components > Hard Drives > SSD
category_lv - Datortehnika > Datoru komponentes > Cietie diski > SSD
category_ru - Datortehnika > Datoru komponentes > Cietie diski > SSD
Code - SEDC600M/3840G
Color - Not applicable
Depth - 100.1 mm
Description - DC600M The Kingston DC600M is a 4th generation SATA 3.0 6Gbps SSD with 3D TLC NAND designed for data centers and mixed workloads. The DC600M is designed for use in heavy-duty rack servers and includes built-in hardware-based power loss (PLP) protection. Thanks to the use of capacitors in the DC600M drive, power failure protection reduces the risk of data loss and ensures proper initialization of the drive after power is restored. The DC600M provides latency and I/O consistency for system integrators, hyperscale data centers, and cloud service providers. Drives with a capacity of 480GB-7680GB are offered to meet any data storage requirements.
Description - Kingston’s DC600M SSD is a fourth-generation data center SATA 3.0, 6Gbps SSD with 3D TLC NAND intended for “mixed use” workloads. The DC600M is suited for use in high-volume rack-mount servers and includes hardware-based on-board PLP. Via power loss capacitors, DC600M protects data against unexpected power failure to reduce the possibility of data loss and ensure that the drive will successfully re-initialise on the next power-up of the system. DC600M is designed to deliver latency and IOPS consistency for system integrators, hyperscale data centers and cloud service providers.
description_en - Kingston Technology DC600M
SSD capacity: 3.84 TB
Teurobody disk form factor: 2.5"
Read speed: 560 MB/s
Write speed: 530 MB/s
Data transfer rate: 6 Gbit/s
Accessories for: Server/worker. station
description_lv - Kingston Technology DC600M
SSD ietilpība: 3,84 TB
Teurobody diska formas koeficients: 2,5 collas
Lasīšanas ātrums: 560 MB/s
Rakstīšanas ātrums: 530 MB/s
Datu pārraides ātrums: 6 Gbit/s
Piederumi: Serverim/darbiniekam. stacija
description_ru - Kingston Technology DC600M Объем SSD: 3,84 TB
форм-фактор тевродотельного диска: 2.5"
Скорость считывания: 560 MB/s
Скорость записи: 530 MB/s
Скорость передачи данных: 6 Gbit/s
Комплектующие для: Сервер/раб. станция
Design > SSD form factor - 2.5"
dimensionalWeight - 46
dimension depth - 20 mm
dimension height - 190 mm
Dimensions - 69.9mm x 100mm x 7mm
dimension weight - 100 g
dimension width - 130 mm
Disk type - SSD
Drive thickness - 7mm
Drive type - Internal
DWPD - 1
EAN - 740617334975
ean - 740617334975
EAN - 0740617334975
EANCode - 0740617334975
Eans - 740617334975
EAN_code - 0740617334975
Features - Component for - Server/workstation
Features - Data transfer rate - 6 Gbit/s
Features - H/W PLP function - Yes
Features - Hardware encryption - No
Features - Hot-Plug support - Yes
Features - Interface - Serial ATA III
Features - Mean time between failures (MTBF) - 2000000 h
Features - Memory type - 3D TLC NAND
Features - Random read (4KB) - 94000 IOPS
Features - Random write (4KB) - 59000 IOPS
Features - Read latency - 200 µs
Features - Read speed - 560 MB/s
Features - SSD capacity - 3.84 TB
Features - SSD form factor - 2.5"
Features - Target workload - Mixed Use (MU)
Features - TBW rating - 7008
Features - Use conditions - Server/Enterprise
Features - Write latency - 30 µs
Features - Write speed - 530 MB/s
Form Factor - 2,5"
Form factor (width) - 2,5'' (SFF)
Full Description Line - SSD series DC600M|3.84TB|SATA|Technology 3D TLC|Write speed 530 MBytes/sec|Read speed 560 MBytes/sec|Form Factor 2,5"|TBW 7008 TB|DWPD 1|MTBF 2000000 hours|Drive thickness 7mm
Gewicht - 0
gross_weight - 0.2 kg
GRUPPE1 - Hard Drive/Optical
GRUPPE2 - Solid State Drive
GTIN - 0740617334975
GTIN - 740617334975
guarantee - 60
guarantee_type - normal
HDD capacity - 3.84 TB
HDD interface - SATA III - 6 Gb/s
Height - 7 mm
HERSTELLER - KINGSTON
Hoehe - 0
HSTNUMMER - SEDC600M/3840G
Laenge - 0
Link - https://www.kingston.com/en/ssd/dc600m-data-center-solid-state-drive?capacity=3.84tb
Logistics data - Country of origin - China, Taiwan
Logistics data - Master (outer) case gross weight - 1.01 kg
Logistics data - Master (outer) case height - 69.9 mm
Logistics data - Master (outer) case length - 203.2 mm
Logistics data - Master (outer) case width - 135.9 mm
Logistics data - Products per master (outer) case - 10 pc(s)
LongDesc - Kingston’s DC600M and DC600ME SSDs are fourth-generation data center SATA 3.0, 6Gbps SSDs utilising 3D TLC NAND intended for “mixed use” server workloads. Both are well suited for a wide variety of server applications and include on-board power loss protection via hold-up capacitors. DC600M and DC600ME are designed to protect data against unexpected power failure and to ensure the drive will successfully reinitialise on the next power-up of the system. Designed to deliver low latency and IO consistency for system integrators, hyperscale data centers and cloud service providers. DC600ME features AES 256-bit encryption and supports TCG OPAL 2.0 security standards. Capacities available from 480GB–7.68TB* to meet your data storage requirements.Designed for data center environments Optimised to meet the high demands of server RAID applications with low latency and IO consistency as the key design criteria.Hardware-based PLPPower loss capacitors to protect user data against unexpected power loss and enhance performance.Delivers excellent quality of service (QoS)*Optimised performance predictability to meetservice-level agreements (SLAs).AES 256-bit Encryption with DC600ME Protect sensitive data with support for AES 256-bit hardware-based encryption and TCG Opal 2.0 security standards with DC600ME. Capacities up to 7.68TB Upgrade and manage storage with capacities up to 7.68TB.*
LongProductName - 3840G DC600M (Mixed-Use) 2.5” Enterprise SATA SSD
LongSummaryDescription - Kingston Technology 3840G DC600M (Mixed-Use) 2.5” Enterprise SATA SSD. SSD capacity: 3.84 TB, SSD form factor: 2.5", Read speed: 560 MB/s, Write speed: 530 MB/s, Data transfer rate: 6 Gbit/s, Component for: Server/workstation
Manufacturer - Kingston
Manufacturer_code - SEDC600M/3840G
Model - DC600M
Model - SEDC600M/3840G
MPN - SEDC600M/3840G
MTBF - 2e+006 hours
Name - Ent. 2,5" 3.84TB Kingston DC600M
Name - Kingston DC600M 3840 GB, SSD (SATA 6 Gb/s, 2.5 design)
Name - Kingston DC600M | 3840 GB | SSD form factor 2.5" | Solid-state drive interface SATA Rev. 3.0 | Read speed 560 MB/s | Write speed 530 MB/s
Name - Kingston SSD DC600M 3840GB
name - SSD drive DC600M 3840GB
NAND flash technology - 3D TLC
Operational conditions - Non-operating vibration - 20 G
Operational conditions - Operating temperature (T-T) - 0 - 70 °C
Operational conditions - Operating vibration - 2.17 G
Operational conditions - Storage temperature (T-T) - -40 - 85 °C
Other features -
Package features > Embeeded battery - No
Package features > Gross depth (mm) - 70.00 mm
Package features > Gross height (mm) - 7.00 mm
Package features > Gross width (mm) - 100.00 mm
Package features > Packing quantity - 1.00 pc(s)
Package features > Palette Qty - 6993 pc(s)
Package features > Paper/Pasteboard - 40.00 g
Package features > Plastic (No PET) - 10.00 g
Package features > Tare weight (kg) - 0.05 kg
Package features > Volume (m3) - 0.00 m³
Package features > WEEE tax - No
Packaging data - Package depth - 9.1 mm
Packaging data - Package height - 184.2 mm
Packaging data - Package weight - 93.2 g
Packaging data - Package width - 129.5 mm
Performance > Read speed - 560 MB/s
Performance > Solid-state drive capacity - 3840 GB
Performance > Solid-state drive interface - SATA Rev. 3.0
Performance > Write speed - 530 MB/s
Power - Power consumption (average) - 1.45 W
Power - Power consumption (idle) - 1.3 W
Power - Power consumption (read) - 1.6 W
Power - Power consumption (write) - 3.6 W
producer - Kingston
Producer - Kingston
producerCode - SEDC600M/3840G
ProducerCode - SEDC600M/3840G
ProductName - 3840G DC600M (Mixed-Use) 2.5” Enterprise SATA SSD
productName - Kingston Technology 3840G DC600M (Mixed-Use) 2.5” Enterprise SATA SSD
productSize - Normal
Random read IOPS (max) - 94 K
Random write IOPS (max) - 59 K
Reading speed - 560 MB/s
Read speed - 560 MBytes/sec
SATA Interface - Yes
Shipping Box Depth Shipping/Package Box Dimensions - 18 cm
Shipping Box Height Shipping/Package Box Dimensions - 1 cm
Shipping box quantity - 1
Shipping Box Weight Shipping/Package Box Dimensions - 0.09 kg
Shipping Box Width Shipping/Package Box Dimensions - 13 cm
ShortDescription - 2.5'' | SSD | 3840GB | 560/530MB/s | Serial ATA 3 | 7mm
ShortSummaryDescription - Kingston Technology 3840G DC600M (Mixed-Use) 2.5” Enterprise SATA SSD, 3.84 TB, 2.5", 560 MB/s, 6 Gbit/s
sizeX - 180
sizeY - 130
sizeZ - 10
SSD Capacity - 3.84TB
SSD series - DC600M
Stck_Kart - 0
Stck_Pal - 0
Storno - Y
TBW - 7008 TB
TBW - 7008 TB
Technical details > Gross weight - 0.14 kg
Technical details > Net weight - 0.09 kg
Technical details > Producer - Kingston
Technical details > Producer product name - DC600M
Technical_details - The Kingston DC600M SSD is a 4th generation SATA 3.0, 6Gbps data center SSD with 3D TLC NAND intended for mixed workloads. The DC600M is suitable for use in high-volume rackmount servers and features hardware-based on-board PLP. Using power failure capacitors, the DC600M protects data from unexpected power outages to reduce the risk of data loss and ensure that the drive is successfully reinitialized the next time the system is turned on. The DC600M is specifically designed to provide system integrators, hyperscale data centers and cloud service providers with consistent latency and IOPS. Item no.: 1916730 Type SSD EAN 0740617334975 Manufacturer no. SEDC600M/3840G DC600M series Design 2.5 inches Capacity 3.84TB Interface 1x SATA/600 Power connector 15-pin power connector Internal interface SATA Data transfer rate reading 560 MB/s Write 59,000 Chip type TLC Power consumption resting 1.3 W IOPS Read 94,000 MTBF 2,000,000 hours TBW 7,008 TB Feature power failure protection, namespace management support (up to 64 namespaces) Dimensions Width: 69.9mm x Height: 7mm x Depth/Length: 100mm Weight 92 grams
Title - Kingston Technology 3840G DC600M (Mixed-Use) 2.5” Enterprise SATA SSD
title_en - Kingston DC600M SSD Disk 3840GB
title_lv - Kingston DC600M SSD Disks 3840GB
title_ru - Kingston DC600M SSD Диск 3840GB
Unit Box Height - 0.01
Unit Box Length - 0.18
Unit Box Width - 0.13
Unit Brutto Volume - 0.000234 cubm
Unit Gross Weight - 0.09 kg
Unit Net Weight - 0.072 kg
URL - https://www.kingston.com/
Vendor Homepage - www.kingston.com/unitedkingdom/en/ssd/dc600m-data-center-solid-state-drive?capacity=3.84tb
vendpn - SEDC600M/3840G
Warranty - 60
Warranty - 60 month(s)
Warranty - 60L months
WarrantyInfo - Limited 5-year warranty with free technical support
warrantyLength - 60
warrantyType - G
Weight - 0,09
Weight - 0.1
weight - 0.15 kg
Weight - 71 g
weight - 90
Weight & dimensions - Depth - 100.1 mm
Weight & dimensions - Height - 70 mm
Weight & dimensions - Weight - 71 g
Weight & dimensions - Width - 69.9 mm
Width - 69.9 mm
Write speed - 530 MBytes/sec
Writing speed - 530 MB/s
