Micron SSD drive 5400 PRO 3840GB MTFDDAK3T8TGA-1BC1ZABYYR

Picture may differ from actual product, there can be accessories and parts not supplied with the actual product.
ID: 896871 Product code: MTFDDAK3T8TGA-1BC1ZABYYR
In stock 30 units
Warranty: 3 years
672.46 €
Delivery options
  • Delivery to Smartpost parcel locker 1.99 €: {delivery_2_txt_full}
  • Delivery to Omniva parcel locker 1.99 €: on Thuesday, 26.11.2024
  • Courier delivery 3.99 €: on Thuesday, 26.11.2024
Main product parameters All parameters
  • Capacity: 3.84TB
  • Type: SATA
  • Read speed (sequential): 540 MB/s
  • Write speed (sequential): 520 MB/s
  • Form factor: 2.5"
  • Interface: SATA III (6Gb/s)
Description

This Micron brand SSD has a 3.84TB capacity and a 2.5" format.

The disk is equipped with the traditional SATA port. It uses SATA data and power cables.

This is a SATA type SSD disk. It uses the SATA III protocol, which is older technology, however SATA is still a good option for everyday use and budget solutions.

The read speed for this SSD drive reaches 540 MB/s. However, it's crucial to note - if the "fast" drives are not provided with adequate cooling, they may not be able to operate at the speed indicated by the manufacturer.

The write speed (Sequential write speed) of this SSD is 520 MB/s. However, if adequate cooling is not provided, "fast" drives may not achieve the speeds guaranteed by the manufacturer.

The format of this SSD drive (physical size of the drive) is 2.5".

The SSD drive has a SATA III (6Gb/s) interface. If it is inserted into an older interface slot, the potential speed of the drive will not be fully utilized, as the older interface will not provide sufficient data transfer bandwidth.

Basic information
Capacity 3.84TB
The HDD capacity in Gigabytes indicates how much information can be stored by the HDD. The capacity of the HDD is fixed and cannot be increased after buying the HDD. Therefore, upon buying the HDD you should verify its compliance with your current volume requirements and provides a reserve for future needs.
Type : SATA
Read speed (sequential) 540 MB/s

Sequential read speed or the mean data reading speed is the most important criterion of the high-speed operation of the SSD. The data from the SSD will be read much more often than written to it because the operating system stores the processed data in the RAM in most cases.

If you want the reading speed of the purchased SSD to exceed the speed of the classic HDD considerably you should choose the SSD with the reading speed of 200 MB/s or above. The additional increase in the performance will be achieved on the account of the data search (SeekTime) which is of much higher level with SSDs than any HDD.

Write speed (sequential) 520 MB/s

The writing speed is almost as important as the reading speed. Also this parameter determines the performance of the SSD, however, as the writing to the disc happens not as often as the data reading and average user will find it subjectively difficult to distinguish between any speed above 100 MB/s and higher indices, except the cases when the SSD is used in a server, for audio/video recording, etc.

Ports and equipment
Form factor 2.5"

Thanks to the small size provided by the SSD technology the standard size of the discs is 2.5", and it is suitable for an average portable computer. It is possible to install the 2.5" disc in the desktop computer if the transition 2.5" -> 3.5" is used, and this transition can be bought at a low cost at TopPC.ee section"Adapteri". The discs with the format 2.5" + 3.5" have this transition included.

1.8" discs are intended for the ultra-compact class portable computers.

PCI-Express SSDs are intended for desktop computers with a free PCI-Express plug available. This technology in most cases is used for ensuring the performance that exceeds the possibilities of other types of connections.

Interface : SATA III (6Gb/s)
Interface SATA

SSDs with SATAII and SATAIII connection are compatible with the connections of both types in the motherboard. Still, it has to be taken into account that the motherboard SATAII connection can provide maximum about 300 MB/s transmission capacity which can reduce the actual transmission capacity of the SSDs whose reading and/or writing speed exceeds this level to the capacity limits of the SATAII.

The situation is similar with the PCI-Express and SATAIII connection slots. Although the SATAIII standard can provide up to 600 MB/s data transmission capacity there are SSDs with the speed exceeding this limit, in this case the manufacturer chooses the PCI-Express connection slot with a higher transmission capacity. The PCI-Express discs cannot be connected to the portable computer.

Specifikācija
Memory type : TLC (Triple-Level Cell)
Random Read IOPS : 95K
Random Write IOPS : 30K
More detailed specification
Box Weight Brutto (kg) - 0.07 kg
Category Code - SFM
Category_1 - Hard Drives and Pendrives
Category_2 - Internal SSD - M.2
Color - Not applicable
Depth - 100.45 mm
Depth (mm) - 100.45 mm
Description -
Description - The Industry’s Most Advanced Data Center SATA SSD The Micron 5400 SSD combines Micron’s proven data center SATA architecture with its advanced 176-layer NAND technology to give customers the best of both worlds. Get more from your SATA platforms with SSDs that have 50% better reliability (mean time to failure, MTTF rating)1 and up to 50% greater endurance than the other leading SATA SSD.2 With the industry’s broadest portfolio of data center SATA SSDs, the Micron 5400 gives you extensive options to get more out of every SATA socket in your servers. The Micron 5400 SSD is available in capacities ranging from 240GB to 7.68TB
Device Location - Internal
dimensionalWeight - 39
dimension depth - 15 mm
dimension height - 100 mm
dimension weight - 62 g
dimension width - 130 mm
Disk type - SSD
Drive thickness - 7mm
Drive type - Internal
Drive Writes Per Day (DWPD) - 1.5
DWPD - 1.5
ean - 649528933829
EAN_code - 0649528933829
External Data Bit Rate - 6 Gbps
Features - Component for - Server/workstation
Features - Data transfer rate - 6 Gbit/s
Features - DWPD - 1.5
Features - Hardware encryption - Yes
Features - Harmonized System (HS) code - 84717070
Features - Interface - Serial ATA
Features - Memory type - 3D TLC NAND
Features - NVMe - No
Features - Product series - 5400 PRO
Features - Random read (4KB) - 95000 IOPS
Features - Random write (4KB) - 30000 IOPS
Features - Security algorithms - 256-bit AES
Features - SSD capacity - 3.84 TB
Features - SSD form factor - 2.5"
Features - Target workload - Read Intensive (RI)
Features - Uncorrectable Bit Error Rate (UBER) - < 1 per 10^17 bits read
Flash Memory Cell Technology - Triple-Level Cell
Form Factor - 2,5"
Form Factor - 2.5"
Form factor (width) - 2,5'' (SFF)
Full Description Line - SSD series 5400 Pro|3.84TB|Technology 3D TLC|Write speed 520 MBytes/sec|Read speed 540 MBytes/sec|Form Factor 2,5"|DWPD 1.5|MTBF 3000000 hours|Drive thickness 7mm
guarantee - 60
guarantee_type - normal
HDD capacity - 3.84 TB
HDD interface - SATA III - 6 Gb/s
Height - 7 mm
Height (mm) - 7 mm
Image - https://content.it4profit.com/pimg/s/resize/900x900x900x900/240424160043693990.jpg
Manufacturer - Micron
Manufacturer_code - MTFDDAK3T8TGA-1BC1ZABYYR
Maximum Operating Ambient Temperature - 70 °C
Maximum Power Consumption - 3.9 W
Maximum Random Read Rate - 95000 IOPS
Maximum Random Write Rate - 30000 IOPS
Maximum Sequential Read Rate - 540 MB/s
Maximum Sequential Write Rate - 520 MB/s
Mean Time Between Failures - 3000000 hr
Memory Technology - 3D NAND
Minimum Operating Ambient Temperature - 0 °C
Model - 5400 PRO  
Model - MTFDDAK3T8TGA-1BC1ZABYY
MTBF - 3e+006 hours
Name - Micron 5400 PRO 3840 GB, SSD - SATA - 2.5, black
name - SSD drive 5400 PRO 3840GB MTFDDAK3T8TGA-1BC1ZABYYR
NAND flash technology - 3D TLC
Nominal Weight - 70 g
Non-Recoverable Errors - 10 per 10^17
Operational conditions - Operating temperature (T-T) - 0 - 70 °C
Other features -
Package Type - Retail
Packs in Box - 1
Pack Weight Brutto (kg) - 0.07 kg
Pieces in pack - 1
producer - Micron
producerCode - MTFDDAK3T8TGA-1BC1ZABYYR
ProductCard - https://content.it4profit.com/itshop/itemcard_cs.jsp?ITEM=220829121906157841&THEME=asbis&LANG=lv
ProductCategory - SSD
ProductCode - MTFDDAK3T8TGA-1BC1ZABYYR
ProductDescription - Micron 5400 PRO 3840GB SATA 2.5'' (7mm) Non-SED SSD [Single Pack], EAN: 649528933829
productName - SSD Micron 5400 PRO 3.84TB SATA 2.5" MTFDDAK3T8TGA-1BC1ZABYYR (DWPD 1.5)
productSize - Normal
ProductType - SSD Server
Random read IOPS (max) - 95 K
Random write IOPS (max) - 30 K
Reading speed - 540 MB/s
Read speed - 540 MBytes/sec
Shipping Box Depth Shipping/Package Box Dimensions - 13 cm
Shipping Box Height Shipping/Package Box Dimensions - 1.5 cm
Shipping box quantity - 1
Shipping Box Weight Shipping/Package Box Dimensions - 0.08 kg
Shipping Box Width Shipping/Package Box Dimensions - 10 cm
sizeX - 100
sizeY - 15
sizeZ - 130
Solid State Drive Features - Power-loss Protection (data at rest)Non-SED
SSD Capacity - 3.84TB
SSD series - 5400 Pro
Storage Capacity - 3.84 TB
Supports Data Channel - SATA III-600
Unit Box Height - 0.015
Unit Box Length - 0.13
Unit Box Width - 0.1
Unit Brutto Volume - 0.000195 cubm
Unit Gross Weight - 0.08 kg
Unit Net Weight - 0.065 kg
Vendor - MICRON
Vendor Homepage - media-www.micron.com/-/media/client/global/documents/products/product-flyer/5400_product_brief.pdf?la=en&rev=c11ea20b11fd4391b5b1aae897b79e8b
vendpn - MTFDDAK3T8TGA-1BC1ZABYYR
Warranty - 60L months
warrantyLength - 60
Warranty Products Returnable - Yes
Warranty Term (month) - 60 mēneši
warrantyType - G
Warranty validation Criteria - Serial Number
Weight - 0,08
Weight - 70 g
weight - 80
Weight & dimensions - Depth - 100.5 mm
Weight & dimensions - Height - 7 mm
Weight & dimensions - Weight - 70 g
Weight & dimensions - Width - 69.8 mm
Width - 69.85 mm
Width (mm) - 69.85 mm
Write speed - 520 MBytes/sec
Writing speed - 520 MB/s
672.46 €
Micron SSD drive 5400 PRO 3840GB MTFDDAK3T8TGA-1BC1ZABYYR
Intel technology provider Platinum 2020
All categories