ID: 889980
Product code: MTFDDAK1T9TGA-1BC1ZABYYR
In stock 8 units
Warranty: 3 years
Micron 5400 PRO, 1.92TB, SATA III, 2.5"
Picture may differ from actual product, there can be accessories and parts not supplied with the actual product.
Delivery options
- Delivery to Smartpost parcel locker 1.99 €: {delivery_2_txt_full}
- Delivery to Omniva parcel locker 1.99 €: on Monday, 09.12.2024
- Courier delivery 3.99 €: on Monday, 09.12.2024
Main product parameters All parameters
- Capacity: 1.92TB
- Type: SATA
- Read speed (sequential): 540 MB/s
- Write speed (sequential): 520 MB/s
- Form factor: 2.5"
- Interface: SATA III (6Gb/s)
Description
Available for purchase, the Micron 2.5" format SSD disk with a large volume of 1.92TB.
This disk uses the standard SATA interface, which operates with traditional SATA data and power cables.
This is a SATA type of disk. Even though this SSD disk operates with an older SATA III protocol, it is fully suitable for both everyday tasks and situations when it's important to reduce costs.
540 MB/s – this is the data reading speed that this SSD disk is capable of reaching. However, we must remember one crucial nuance - "fast" disks may not show the performance promised by the manufacturer if adequate cooling is not provided.
The write speed (Sequential write speed) of this SSD is 520 MB/s. However, if adequate cooling is not provided, "fast" drives may not achieve the speeds guaranteed by the manufacturer.
This is an SSD disk in the 2.5" format.
This SSD drive interface is SATA III (6Gb/s). If you insert this drive into an older interface slot, the speed of the drive will decrease, as the drive will not have sufficient data transfer speed (Bandwidth).
Basic information
Capacity
1.92TB
The HDD capacity in Gigabytes indicates how much information can be stored by the HDD. The capacity of the HDD is fixed and cannot be increased after buying the HDD. Therefore, upon buying the HDD you should verify its compliance with your current volume requirements and provides a reserve for future needs.
Type
: SATA
Read speed (sequential)
540 MB/s
Sequential read speed or the mean data reading speed is the most important criterion of the high-speed operation of the SSD. The data from the SSD will be read much more often than written to it because the operating system stores the processed data in the RAM in most cases.
If you want the reading speed of the purchased SSD to exceed the speed of the classic HDD considerably you should choose the SSD with the reading speed of 200 MB/s or above. The additional increase in the performance will be achieved on the account of the data search (SeekTime) which is of much higher level with SSDs than any HDD.
Write speed (sequential)
520 MB/s
The writing speed is almost as important as the reading speed. Also this parameter determines the performance of the SSD, however, as the writing to the disc happens not as often as the data reading and average user will find it subjectively difficult to distinguish between any speed above 100 MB/s and higher indices, except the cases when the SSD is used in a server, for audio/video recording, etc.
Ports and equipment
Form factor
2.5"
Thanks to the small size provided by the SSD technology the standard size of the discs is 2.5", and it is suitable for an average portable computer. It is possible to install the 2.5" disc in the desktop computer if the transition 2.5" -> 3.5" is used, and this transition can be bought at a low cost at TopPC.ee section"Adapteri". The discs with the format 2.5" + 3.5" have this transition included.
1.8" discs are intended for the ultra-compact class portable computers.
PCI-Express SSDs are intended for desktop computers with a free PCI-Express plug available. This technology in most cases is used for ensuring the performance that exceeds the possibilities of other types of connections.
Interface
: SATA III (6Gb/s)
Interface
SATA
SSDs with SATAII and SATAIII connection are compatible with the connections of both types in the motherboard. Still, it has to be taken into account that the motherboard SATAII connection can provide maximum about 300 MB/s transmission capacity which can reduce the actual transmission capacity of the SSDs whose reading and/or writing speed exceeds this level to the capacity limits of the SATAII.
The situation is similar with the PCI-Express and SATAIII connection slots. Although the SATAIII standard can provide up to 600 MB/s data transmission capacity there are SSDs with the speed exceeding this limit, in this case the manufacturer chooses the PCI-Express connection slot with a higher transmission capacity. The PCI-Express discs cannot be connected to the portable computer.
Specifikācija
Memory type
: TLC (Triple-Level Cell)
Random Read IOPS
: 95K
Random Write IOPS
: 33K
More detailed specification
Box Weight Brutto (kg) - 0.07 kg
Category Code - SFM
Category_1 - Hard Drives and Pendrives
Category_2 - Internal Hard Drives - SATA - 2.5 inch
Color - Not applicable
Depth - 100.45 mm
Depth (mm) - 100.45 mm
Description -
Description - The Industry’s Most Advanced Data Center SATA SSD The Micron 5400 SSD combines Micron’s proven data center SATA architecture with its advanced 176-layer NAND technology to give customers the best of both worlds. Get more from your SATA platforms with SSDs that have 50% better reliability (mean time to failure, MTTF rating)1 and up to 50% greater endurance than the other leading SATA SSD.2 With the industry’s broadest portfolio of data center SATA SSDs, the Micron 5400 gives you extensive options to get more out of every SATA socket in your servers. The Micron 5400 SSD is available in capacities ranging from 240GB to 7.68TB
Device Location - Internal
dimensionalWeight - 52
dimension depth - 20 mm
dimension height - 100 mm
dimension weight - 76 g
dimension width - 130 mm
Disk type - SSD
Drive thickness - 7mm
Drive type - Internal
Drive Writes Per Day (DWPD) - 1.5
DWPD - 1.5
ean - 649528934239
EAN_code - 0649528934239
External Data Bit Rate - 6 Gbps
Features - Component for - Server/workstation
Features - Data transfer rate - 6 Gbit/s
Features - DWPD - 1.5
Features - Hardware encryption - Yes
Features - Harmonized System (HS) code - 84717070
Features - Interface - Serial ATA
Features - Memory type - 3D TLC NAND
Features - NVMe - No
Features - Product series - 5400 PRO
Features - Random read (4KB) - 95000 IOPS
Features - Random write (4KB) - 33000 IOPS
Features - Security algorithms - 256-bit AES
Features - SSD capacity - 1.92 TB
Features - SSD form factor - 2.5"
Features - Target workload - Read Intensive (RI)
Features - Uncorrectable Bit Error Rate (UBER) - < 1 per 10^17 bits read
Flash Memory Cell Technology - Triple-Level Cell
Form Factor - 2,5"
Form Factor - 2.5"
Form factor (width) - 2,5'' (SFF)
Full Description Line - SSD series 5400 Pro|1.92TB|Technology 3D TLC|Write speed 520 MBytes/sec|Read speed 540 MBytes/sec|Form Factor 2,5"|DWPD 1.5|MTBF 3000000 hours|Drive thickness 7mm
guarantee - 60
guarantee_type - normal
HDD capacity - 1.92 TB
HDD interface - SATA III - 6 Gb/s
Height - 7 mm
Height (mm) - 7 mm
Manufacturer - Micron
Manufacturer_code - MTFDDAK1T9TGA-1BC1ZABYYR
Maximum Operating Ambient Temperature - 70 °C
Maximum Power Consumption - 3.9 W
Maximum Random Read Rate - 95000 IOPS
Maximum Random Write Rate - 33000 IOPS
Maximum Sequential Read Rate - 540 MB/s
Maximum Sequential Write Rate - 520 MB/s
Mean Time Between Failures - 3000000 hr
Memory Technology - 3D NAND
Minimum Operating Ambient Temperature - 0 °C
Model - 5400 PRO
Model - MTFDDAK1T9TGA-1BC1ZABYYR
MTBF - 3e+006 hours
Name - Micron 5400 PRO 1920 GB, SSD (black, SATA 6 Gb/s, 2.5")
name - SSD drive 5400 PRO 1920GB MTFDDAK1T9TGA-1BC1ZABYYR
NAND flash technology - 3D TLC
Nominal Weight - 70 g
Non-Recoverable Errors - 10 per 10^17
Operational conditions - Operating temperature (T-T) - 0 - 70 °C
Other features -
Package Type - Retail
Packs in Box - 1
Pack Weight Brutto (kg) - 0.07 kg
Pieces in pack - 1
producer - Micron
producerCode - MTFDDAK1T9TGA-1BC1ZABYYR
ProductCard - https://content.it4profit.com/itshop/itemcard_cs.jsp?ITEM=220829121905669851&THEME=asbis&LANG=lv
ProductCategory - SSD
ProductCode - MTFDDAK1T9TGA-1BC1ZABYYR
ProductDescription - Micron 5400 PRO 1920GB SATA 2.5'' (7mm) Non-SED SSD [Single Pack], EAN: 649528934239
productName - SSD Micron 5400 PRO 1.92TB SATA 2.5" MTFDDAK1T9TGA-1BC1ZABYYR (DWPD 1.5)
productSize - Normal
ProductType - SSD Server
Random read IOPS (max) - 95 K
Random write IOPS (max) - 33 K
Reading speed - 540 MB/s
Read speed - 540 MBytes/sec
Shipping Box Depth Shipping/Package Box Dimensions - 13 cm
Shipping Box Height Shipping/Package Box Dimensions - 1.5 cm
Shipping box quantity - 1
Shipping Box Weight Shipping/Package Box Dimensions - 0.08 kg
Shipping Box Width Shipping/Package Box Dimensions - 10 cm
sizeX - 130
sizeY - 20
sizeZ - 100
Solid State Drive Features - Power-loss Protection (data at rest)Non-SED
SSD Capacity - 1.92TB
SSD series - 5400 Pro
Storage Capacity - 1.92 TB
Supports Data Channel - SATA III-600
Technical_details - The Micron 5400 PRO Series SATA Solid State Drives (SSDs) feature the latest 3D NAND technology with everything you would expect from Micron's broadest SATA portfolio in the industry. A 176-layer 3D TLC NAND flash drive with SATA interface, the Micron 5400 PRO offers high performance, consistency and reliability on a proven architecture. The Micron 5400 PRO SSD has a mean time to failure (MTTF) of 3 million device hours - 50% more than the norm. Added to this are Micron's solid firmware functions for extended data security. Item no.: 1878149 Type SSD Color: Black EAN 0649528934239 Manufacturer no. MTFDDAK1T9TGA-1BC1ZABYYR 5400 PRO series Design 2.5 inches Capacity 1.92TB Interface 1x SATA/600 Power connector 15-pin power connector Internal interface SATA Read data transfer rate 540 MB/s Write 33,000 Chip type TLC Power consumption operation 3 W IOPS Read 95,000 MTBF 3,000,000 hours Feature AES 256-bit Encryption, ATA Security, Power Failure Data Protection, Enterprise Data Path Protection, Adaptive Thermal Monitoring, Hot Plug Support, RAIN Technology Dimensions Width: 69.85mm x Height: 7mm x Depth/Length: 100.45mm Weight 70 grams
Unit Box Height - 0.015
Unit Box Length - 0.13
Unit Box Width - 0.1
Unit Brutto Volume - 0.000195 cubm
Unit Gross Weight - 0.08 kg
Unit Net Weight - 0.065 kg
Vendor - MICRON
Vendor Homepage - media-www.micron.com/-/media/client/global/documents/products/product-flyer/5400_product_brief.pdf?la=en&rev=c11ea20b11fd4391b5b1aae897b79e8b
vendpn - MTFDDAK1T9TGA-1BC1ZABYYR
Warranty - 60L months
warrantyLength - 60
Warranty Products Returnable - Yes
Warranty Term (month) - 60 mēneši
warrantyType - G
Warranty validation Criteria - Serial Number
Weight - 0,08
Weight - 70 g
weight - 80
Weight & dimensions - Depth - 100.5 mm
Weight & dimensions - Height - 7 mm
Weight & dimensions - Weight - 70 g
Weight & dimensions - Width - 69.8 mm
Width - 69.85 mm
Width (mm) - 69.85 mm
Write speed - 520 MBytes/sec
Writing speed - 520 MB/s
Category Code - SFM
Category_1 - Hard Drives and Pendrives
Category_2 - Internal Hard Drives - SATA - 2.5 inch
Color - Not applicable
Depth - 100.45 mm
Depth (mm) - 100.45 mm
Description -
Description - The Industry’s Most Advanced Data Center SATA SSD The Micron 5400 SSD combines Micron’s proven data center SATA architecture with its advanced 176-layer NAND technology to give customers the best of both worlds. Get more from your SATA platforms with SSDs that have 50% better reliability (mean time to failure, MTTF rating)1 and up to 50% greater endurance than the other leading SATA SSD.2 With the industry’s broadest portfolio of data center SATA SSDs, the Micron 5400 gives you extensive options to get more out of every SATA socket in your servers. The Micron 5400 SSD is available in capacities ranging from 240GB to 7.68TB
Device Location - Internal
dimensionalWeight - 52
dimension depth - 20 mm
dimension height - 100 mm
dimension weight - 76 g
dimension width - 130 mm
Disk type - SSD
Drive thickness - 7mm
Drive type - Internal
Drive Writes Per Day (DWPD) - 1.5
DWPD - 1.5
ean - 649528934239
EAN_code - 0649528934239
External Data Bit Rate - 6 Gbps
Features - Component for - Server/workstation
Features - Data transfer rate - 6 Gbit/s
Features - DWPD - 1.5
Features - Hardware encryption - Yes
Features - Harmonized System (HS) code - 84717070
Features - Interface - Serial ATA
Features - Memory type - 3D TLC NAND
Features - NVMe - No
Features - Product series - 5400 PRO
Features - Random read (4KB) - 95000 IOPS
Features - Random write (4KB) - 33000 IOPS
Features - Security algorithms - 256-bit AES
Features - SSD capacity - 1.92 TB
Features - SSD form factor - 2.5"
Features - Target workload - Read Intensive (RI)
Features - Uncorrectable Bit Error Rate (UBER) - < 1 per 10^17 bits read
Flash Memory Cell Technology - Triple-Level Cell
Form Factor - 2,5"
Form Factor - 2.5"
Form factor (width) - 2,5'' (SFF)
Full Description Line - SSD series 5400 Pro|1.92TB|Technology 3D TLC|Write speed 520 MBytes/sec|Read speed 540 MBytes/sec|Form Factor 2,5"|DWPD 1.5|MTBF 3000000 hours|Drive thickness 7mm
guarantee - 60
guarantee_type - normal
HDD capacity - 1.92 TB
HDD interface - SATA III - 6 Gb/s
Height - 7 mm
Height (mm) - 7 mm
Manufacturer - Micron
Manufacturer_code - MTFDDAK1T9TGA-1BC1ZABYYR
Maximum Operating Ambient Temperature - 70 °C
Maximum Power Consumption - 3.9 W
Maximum Random Read Rate - 95000 IOPS
Maximum Random Write Rate - 33000 IOPS
Maximum Sequential Read Rate - 540 MB/s
Maximum Sequential Write Rate - 520 MB/s
Mean Time Between Failures - 3000000 hr
Memory Technology - 3D NAND
Minimum Operating Ambient Temperature - 0 °C
Model - 5400 PRO
Model - MTFDDAK1T9TGA-1BC1ZABYYR
MTBF - 3e+006 hours
Name - Micron 5400 PRO 1920 GB, SSD (black, SATA 6 Gb/s, 2.5")
name - SSD drive 5400 PRO 1920GB MTFDDAK1T9TGA-1BC1ZABYYR
NAND flash technology - 3D TLC
Nominal Weight - 70 g
Non-Recoverable Errors - 10 per 10^17
Operational conditions - Operating temperature (T-T) - 0 - 70 °C
Other features -
Package Type - Retail
Packs in Box - 1
Pack Weight Brutto (kg) - 0.07 kg
Pieces in pack - 1
producer - Micron
producerCode - MTFDDAK1T9TGA-1BC1ZABYYR
ProductCard - https://content.it4profit.com/itshop/itemcard_cs.jsp?ITEM=220829121905669851&THEME=asbis&LANG=lv
ProductCategory - SSD
ProductCode - MTFDDAK1T9TGA-1BC1ZABYYR
ProductDescription - Micron 5400 PRO 1920GB SATA 2.5'' (7mm) Non-SED SSD [Single Pack], EAN: 649528934239
productName - SSD Micron 5400 PRO 1.92TB SATA 2.5" MTFDDAK1T9TGA-1BC1ZABYYR (DWPD 1.5)
productSize - Normal
ProductType - SSD Server
Random read IOPS (max) - 95 K
Random write IOPS (max) - 33 K
Reading speed - 540 MB/s
Read speed - 540 MBytes/sec
Shipping Box Depth Shipping/Package Box Dimensions - 13 cm
Shipping Box Height Shipping/Package Box Dimensions - 1.5 cm
Shipping box quantity - 1
Shipping Box Weight Shipping/Package Box Dimensions - 0.08 kg
Shipping Box Width Shipping/Package Box Dimensions - 10 cm
sizeX - 130
sizeY - 20
sizeZ - 100
Solid State Drive Features - Power-loss Protection (data at rest)Non-SED
SSD Capacity - 1.92TB
SSD series - 5400 Pro
Storage Capacity - 1.92 TB
Supports Data Channel - SATA III-600
Technical_details - The Micron 5400 PRO Series SATA Solid State Drives (SSDs) feature the latest 3D NAND technology with everything you would expect from Micron's broadest SATA portfolio in the industry. A 176-layer 3D TLC NAND flash drive with SATA interface, the Micron 5400 PRO offers high performance, consistency and reliability on a proven architecture. The Micron 5400 PRO SSD has a mean time to failure (MTTF) of 3 million device hours - 50% more than the norm. Added to this are Micron's solid firmware functions for extended data security. Item no.: 1878149 Type SSD Color: Black EAN 0649528934239 Manufacturer no. MTFDDAK1T9TGA-1BC1ZABYYR 5400 PRO series Design 2.5 inches Capacity 1.92TB Interface 1x SATA/600 Power connector 15-pin power connector Internal interface SATA Read data transfer rate 540 MB/s Write 33,000 Chip type TLC Power consumption operation 3 W IOPS Read 95,000 MTBF 3,000,000 hours Feature AES 256-bit Encryption, ATA Security, Power Failure Data Protection, Enterprise Data Path Protection, Adaptive Thermal Monitoring, Hot Plug Support, RAIN Technology Dimensions Width: 69.85mm x Height: 7mm x Depth/Length: 100.45mm Weight 70 grams
Unit Box Height - 0.015
Unit Box Length - 0.13
Unit Box Width - 0.1
Unit Brutto Volume - 0.000195 cubm
Unit Gross Weight - 0.08 kg
Unit Net Weight - 0.065 kg
Vendor - MICRON
Vendor Homepage - media-www.micron.com/-/media/client/global/documents/products/product-flyer/5400_product_brief.pdf?la=en&rev=c11ea20b11fd4391b5b1aae897b79e8b
vendpn - MTFDDAK1T9TGA-1BC1ZABYYR
Warranty - 60L months
warrantyLength - 60
Warranty Products Returnable - Yes
Warranty Term (month) - 60 mēneši
warrantyType - G
Warranty validation Criteria - Serial Number
Weight - 0,08
Weight - 70 g
weight - 80
Weight & dimensions - Depth - 100.5 mm
Weight & dimensions - Height - 7 mm
Weight & dimensions - Weight - 70 g
Weight & dimensions - Width - 69.8 mm
Width - 69.85 mm
Width (mm) - 69.85 mm
Write speed - 520 MBytes/sec
Writing speed - 520 MB/s
