category - Aircooling|Fans|PWM Fans
Category_1 - Computer Cases and Cooling
Category_2 - Fans
code - 3831109897621
ean - 3831109897621
EAN_code - 3831109897621
Manufacturer - EKWB
Manufacturer_code - 3831109897621
name - EK Water Blocks EK-Loop FPT 140er DRGB PWM Lüfter, 600-2200U/min - schwarz
Name - EKWB EK-Loop Fan FPT 140 D-RGB - Black, case fan (black)
Technical_details - The EK-Loop Fan FPT 140 D-RGB is a 140mm high-pressure computer cooling fan designed and built primarily for high-performance computer liquid cooling systems. The FPT series fans are intended to completely replace the EK-Vardar fans as they improve many aspects while still focusing on excellent cooler performance. These fans are characterized by an optimized and balanced power/noise ratio throughout the fan's entire operating range. The FPT fans feature a full frame design that does not allow air to escape from the frame, resulting in better overall static pressure. This fan enables daisy chaining, which ultimately reduces cable clutter and simplifies cable routing through EK-OmniLink, an ecosystem based on 8-pin Micro-Fit connectors. All signal and power cables for PWM and D-RGB run through a single cable and a single connector, which then uses a single cable to connect to the source. Item number: 1885688 Fan type Color: Black EAN 3831109897621 FPT series Type of case fan Use for PC cases Fastening screwed Volume 44.56 dB Equipment LED lighting LED lighting Yes, addressable RGB header Color RGB RGB standard AURA Sync, Mystic Light, RGB Fusion, RGB LED Speed 600 to 2,000 rpm Fan bearing FDB - Fluid Dynamic Bearing Flow rate 200.5 m3/h (118.01 cfm) Air pressure up to 3.57 mm/H2O Power connector 4-pin PWM Voltage range 12 volts Power consumption 5.5 watts Cable length 12 cm Feature Full Pressure Technology (FPT) is a full frame design that is in contact with the radiator, completely sealing it and allowing no loss of static air pressure. There are rubber corners on both sides of the fan to reduce the transmission of vibrations to the rest of the PC. The EK logo on the frame is mounted in two orientations, allowing the user to achieve the optimal logo orientation for aesthetic purposes. The cable can optionally be moved to the other side if this makes cable routing easier. Learn more One of the key features of the EK-Loop Fan FPT 140 D-RGB fans is their simplicity, as they use standard 3-pin 5V D-RGB connectors. This means it can be used with any standard 3-pin 5V addressable D-RGB controller or any of the popular RGB synchronization technologies from all major motherboard manufacturers. The arrow mark on the 3-pin LED connector must be aligned with the +5V mark on the D-RGB (ARGB) header. Accessories available: 1x extension cable (50 cm), 4x screws Dimensions Fan1 quantity: 1 piece, width: 140 mm, height: 140 mm, depth: 27 mm
Weight - 0,34
