Western Digital 10TB, 7200rpm, 256MB, SATAIII, Ultrastar DC HC330, SE

Pilt võib erineda tegelikust tootest, võib esineda tarvikuid ja osi, mis ei ole tegeliku tootega kaasas.
ID: 437196 Tootekood: 0B42266
Laos 6 üksused
Garantii: 3 aastat
278.35 €
Tarnevõimalused
  • Kohaletoimetamine Smartposti pakiautomaati 1,99 €: kolmapäeval, 27.11.2024
  • Omniva pakiautomaati kohaletoimetamine 1,99 €: kolmapäeval, 27.11.2024
  • Kulleri kohaletoimetamine 3,99 €: kolmapäeval, 27.11.2024
Peamised tooteparameetrid Kõik parameetrid
  • Maht: 10 TB
  • Ühenduse liides: SATA III
  • Pöörded: 7200 rpm
  • Buffer: 256 MB
Kirjeldus
Dateks pakub osta Western Digital kõvaketas, mille 10 TB andmemaht, SATA III ühendus, 7200 rpm pöörlemiskiirus ja 256 MB vahemälu.

Sellel kõvakettal on SATAIII ühendus. SATAIII ehk SATA 6GB/s on uusima põlvkonna andmeedastusühendus, mida leidub kõige moodsamates arvutites, et tagada piisav SSD-ketaste andmevoog, mis ületab SATAII võimalusi. Kõvaketaste vahemälu kiirus võib mõnikord ületada ka SATAII läbipääsuvõimalusi, sest sisuliselt on see vahemälu väikese suurusega SDD-ketas (~64 Mb). Seetõttu on soovitatav valida SATAIII ketas, kui emaplaadil on vastav port olemas.

Tänu 7200 rpm magnetketaste pöörlemiskiirusele tagab see kõvaketas optimaalse kiire töö andmete otsimisel ja edastamisel. 7200 rpm on klassikaline standard universaalseks kasutamiseks nii operatsioonisüsteemi ja rakenduste hooldamisel kui ka andmete arhiveerimisel.
Kõik parameetrid
Kasutamine : Server
Maht 10 TB
Kõvaketta maht gigabaitides näitab ära, millist informatsiooni mahtu suudab säilitada kõvaketas. Kõvaketta maht on fikseeritud ja ei ole suurendatav pärast ketta soetamist, seetõttu veenduge kõvaketta soetamisel, kas see vastab teie olemasoleva mahu vajadustele, ning samuti on olemas varu tuleviku vajadusteks.
Ühenduse liides SATA III
Kõvaketta ühendamine arvutiga. Praeusel ajal on tööstusstandardiks SATA liides. Vanematel arvutitel on olemas IDE liides. Enne, kui soetada kõvaketas, veenduge selles, et emaplaadil on vaba liides ja valitud kettamahu tugi.
Pöörded 7200 rpm
Kõvaketta pöörete arv. Enamik lauaarvutite kõvakettaid on 7200rpm pöörete arvuga, mis on juba muutunud tööstusstandardiks. Juhul, kui soovite suuremat kiirust, soetage 10000rpm pöörete arvuga kõvaketas. 10000rpm kõvaketas töömüra, temperatuur ja voolutarbimine on palju suuremad, kui 7200rpm ketta näitajad, seetõttu enne, kui soetate 10000rpm ketta, veenduge korpuse, toiteploki ja jahutuse vastavuses sellise ketta tehnilistele nõudmistele.
Buffer 256 MB
Andmepuhver on kõvakettale integreeritud kiiretoimeline mälu, mis võimaldab kettal ühtlase kiirusega vastu võtta andmeid, olenemata sellest, et antud hetkel on ketta füüsiline mälu koormatud. Juhul, kui töötate rohkearvuliste pisifailidega (dokumendid, fotod jm.) soovitame soetada kõvaketta 8Mb, või suurema andmepuhvriga.
Täpsem spetsifikatsioon
ARTIKEL1 - ULTRASTAR DC HC330 10TB SATA
ARTIKEL2 - 3.5IN 7200RPM - WUS721010ALE6L4
Box Weight Brutto (kg) - 15 kg
Buffer memory size - 256 MB
Bytes per Sector - 512 Bytes/sector
Category 1 - Festplatten
Category 2 - Interne Festplatten
Category Code - HES
Depth (mm) - 147 mm
Description - Western Digital Ultrastar. Offering Mid Capacity Drives. The Western Digital Ultrastar DC HC330-series provides low to mid-capacity drives that are economical to acquire, yet deliver quick and reliable data access for traditional data center applications. Economical Capacities and Fast Data Access Key Requirements for HDDs in the Data Center IT managers need to offer storage tiers as they deploy purpose-built solutions to meet their on-prem, off-prem & cloud storage requirements. While helium filled drives enable the highest capacities, air-filled drives offer important benefits. With a lower TCA (total cost of acquisition), legacy options, and higher access density (IOPs/TB), they are the perfect choice for maintaining a desired level of performance while allowing customers to tailor budgets to meet their needs. The Western Digital Ultrastar DC HC300-Series help to address data center requirements by providing capacities from 4 TB to 10 TB while increasing performance over prior generations. They are designed for a variety of applications including traditional storage arrays, rack-mounted storage enclosures and server-based distributed storage systems, as well as distributed and scalable computing, including block and file storage architectures. They are offered at 7,200 RPM with either 6 Gb/s SATA or 12 Gb/s SAS interface in Advanced Format 4Kn and 512e format. A 512n option is also available on 4 TB models to support legacy systems with native 512-byte block sizes. Technology Innovation Delivers Efficiency and Performance for Traditional and Legacy Systems WD Ultrastar DC SAS and SATA HC3000-Series are based on a proven and cost-efficient air-based HDD platform design, with Conventional Magnetic Recording (CMR) technology in a 3.5-inch large form factor. These HDDs leverage common hardware and firmware while featuring a second-generation, dual-stage microactuator to enhance head positioning accuracy for better drive performance. Write performance gains are also supported by Western Digital’s media cache architecture, a disk-based caching technology that provides a large cache area on the disk, improving reliability and data integrity. Finally, the addition of a flash-based non-volatile cache (NVC) on both SATA and SAS models helps improve write performance.
Device Location - Internal
dimensionalWeight - 75
Dimensions - 101.6 x 147.0 x 26.1 mm
EAN - 8032976141199
EAN - 8592978184841
EANCode -
External Data Bit Rate - 6 Gbps
Features - 24/7 operation - Yes
Features - Average latency - 4.16 ms
Features - HDD capacity - 10 TB
Features - HDD interface transfer rate - 6 Gbit/s
Features - HDD size - 3.5"
Features - HDD speed - 7200 RPM
Features - HDD sustained transfer rate - 260 MiB/s
Features - Interface - Serial ATA III
Features - Mean time between failures (MTBF) - 2000000 h
Features - Noise level (idle) - 3.4 dB
Features - Read seek time - 8 ms
Features - Start/stop cycles - 600000
Features - Storage drive buffer size - 256 MB
Features - Type - HDD
Features - Write seek time - 8.6 ms
Form Factor - 3,5"
Form Factor - 3.5"
Full Description Line - Ultrastar DC HC330|WUS721010ALE6L4|10TB|SATA|Buffer 256 MB|7200 rpm|3,5"
Gross Weight Kg - 0,65
GRUPPE1 - Hard Drive/Optical
GRUPPE2 - Hard Drive Sata
Hard Drive Features - 24/7Dual Stage ActuatorHelioSeal TechnologyDynamic Fly Height TechnologyEnhanced Rotational Vibration Safeguard (RVS)
HDD Capacity - 10TB
HDD Family name - Ultrastar DC HC330
Height (mm) - 26.1 mm
HERSTELLER - WESTERN DIGITAL
HSTNUMMER - 0B42266
Image - https://content.it4profit.com/pimg/s/resize/800x800x800x800/220504160015681600.jpg
Installed Cache Memory Storage Capacity - 256 MB
Internal Data Bit Rate - 273 MB/sec
Manufacturer - Western Digital
Manufacturer Code - 0B42266
Manufacturer Name - Western Digital
Maximum Non-Operating Ambient Temperature - 70 °C
Maximum Operating Ambient Temperature - 60 °C
Maximum Power Consumption - 6.9 W
Mean Time Between Failures - 2500000 hr
Minimum Non-Operating Ambient Temperature - -40 °C
Minimum Operating Ambient Temperature - 5 °C
Minimum Power Consumption - 5 W
Model name - WUS721010ALE6L4
MPN - 0B42266
Name - 10TB WUS721010ALE6L4 WD Ultrastar DC HC330 Ent.
Nominal Weight - 0.66 kg
Non-Recoverable Errors - 1 per 10^15
Operational conditions - Non-operating shock - 250 G
Operational conditions - Non-operating vibration - 1.04 G
Operational conditions - Operating shock - 70 G
Operational conditions - Operating temperature (T-T) - 5 - 60 °C
Operational conditions - Operating vibration - 0.67 G
Operational conditions - Storage temperature (T-T) - -40 - 70 °C
Package Type - Box
Packs in Box - 20
Pack Weight Brutto (kg) - 0.75 kg
Pack Weight Netto (kg) - 0 kg
Pieces in pack - 1
Power - Operating voltage - 5 / 12 V
Power - Power consumption (idle) - 8 W
producerCode - 0B42266
ProductCard - https://content.it4profit.com/itshop/itemcard_cs.jsp?ITEM=191114124414553417&THEME=asbis&LANG=lv
ProductCategory - Cietie diski
ProductCode - WUS721010ALE6L4
ProductDescription - HDD Server WD/HGST ULTRASTAR DC HC330 (3.5’’, 10TB, 256MB, 7200 RPM, SATA 6Gb/s, 512N SE), SKU: 0B42266
productName - Western Digital Ultrastar DC HC330 3.5" 10000 GB Serial ATA III
productSize - Normal
ProductType - HDD Server
Retail Packaging Net Weight Carton - 0 kg
Retail Packaging Net Weight Plastic - 0 kg
Rotational Speed - 7200 rpm
Rotation speed - 7200 rpm
SATA Interface - Yes
Sector Capacity - 512 B
Shipping Box Depth Shipping/Package Box Dimensions - 15 cm
Shipping Box Height Shipping/Package Box Dimensions - 10.5 cm
Shipping box quantity - 1
Shipping Box Weight Shipping/Package Box Dimensions - 0.739 kg
Shipping Box Width Shipping/Package Box Dimensions - 2.5 cm
Shock Tolerance Operating - 70G @ 2ms
Shock Tolerance Storage - 300G @ 2ms
Short description - WD HD3.5" SATA3-Raid 10TB WUS721010ALE6L4 (Di)
sizeX - 100
sizeY - 150
sizeZ - 25
Start / Stop Cycles - 600000
Stck_Kart - 20
Stck_Pal - 100
Storage Capacity - 10 TB
Storno - Y
Supports Data Channel - SATA III-600
Unit Box Height - 0.105
Unit Box Length - 0.15
Unit Box Width - 0.025
Unit Brutto Volume - 0.0003938 cubm
Unit Gross Weight - 0.739 kg
Unit Net Weight - 0.73 kg
Vendor - WESTERN DIGITAL
Vendor Homepage - www.westerndigital.com/products/data-center-drives/ultrastar-dc-hc300-series-hdd
Warranty - 60L months
warrantyLength - 60
Warranty Products returnable - Yes
Warranty Term (month) - 60 month(s)
warrantyType - G
Warranty validation Criteria - Serial Number
Weight - 0.74
weight - 690
Weight & dimensions - Depth - 26.1 mm
Weight & dimensions - Height - 147 mm
Weight & dimensions - Weight - 750 g
Weight & dimensions - Width - 101.6 mm
Width (mm) - 101.6 mm
278.35 €
Western Digital 10TB, 7200rpm, 256MB, SATAIII, Ultrastar DC HC330, SE
Intel technology provider Platinum 2020
Kõik kategooriad