ID: 834126
Tootekood: ALEG-710-1TCS
Laos >50 üksused
Garantii: 3 aastat
ADATA Legend 710, 1TB, M.2 Gen3 x4
Pilt võib erineda tegelikust tootest, võib esineda tarvikuid ja osi, mis ei ole tegeliku tootega kaasas.
Tarnevõimalused
- Kohaletoimetamine Smartposti pakiautomaati 1,99 €: kolmapäeval, 27.11.2024
- Omniva pakiautomaati kohaletoimetamine 1,99 €: kolmapäeval, 27.11.2024
- Kulleri kohaletoimetamine 3,99 €: kolmapäeval, 27.11.2024
Peamised tooteparameetrid Kõik parameetrid
- Maht: 1 TB
- Tüüp: NVMe
- Lugemiskiirus (Seq. Read): 2400 MB/s
- Kirjutamise kiirus (Seq. Write): 1800 MB/s
- Formaat: M.2 80mm (2280)
- Liides: PCIe 3.0 x4
Kirjeldus
Pakume osta Adata M.2 80mm (2280) formaadis SSD 1 TB suure mahutavusega.
Täiendava eelisena on SSD-kettad täiesti müravabad, sest erinevalt tavalistest kõvaketastest ei sisalda need mehaanilisi liikuvaid osi. Teine omadus on äärmiselt madal energiatarve, mida sülearvutiomanikud kindlasti hindavad, sest see parameeter suurendab märkimisväärselt aku tööaega.
Täiendava eelisena on SSD-kettad täiesti müravabad, sest erinevalt tavalistest kõvaketastest ei sisalda need mehaanilisi liikuvaid osi. Teine omadus on äärmiselt madal energiatarve, mida sülearvutiomanikud kindlasti hindavad, sest see parameeter suurendab märkimisväärselt aku tööaega.
Põhiteave
Maht
1 TB
Kõvaketta maht gigabaitides näitab ära, millist informatsiooni mahtu suudab säilitada kõvaketas. Kõvaketta maht on fikseeritud ja ei ole suurendatav pärast ketta soetamist, seetõttu veenduge kõvaketta soetamisel, kas see vastab teie olemasoleva mahu vajadustele, ning samuti on olemas varu tuleviku vajadusteks.
Tüüp
: NVMe
Lugemiskiirus (Seq. Read)
2400 MB/s
Sequential read speed, ehk keskmine andmete lugemise kiirus on oluline SSD ketta töökiiruse kriteerium. Andmeid SSD kettalt loetakse palju sagedamini, kui kirjutatakse tagasi, kuna operatsioonisüsteem suuremalt osalt töödeldud andmeid säilitab operatiivmälus.
Juhul, kui soovite, et soetatud SSD ketta lugemiskiirus oluliselt ületaks klassikalise kõvaketta kiirust, valige SSD ketas 200 MB/s või suurema lugemise kiirusega. Täiendav suutlikkuse (jõudluse) kasv toimub andmete otsingu (SeekTime) arvel, mis SSD ketastel, kui sellistel, on lugematuid kordi paremal tasemel mistahes kõvakettast.
Kirjutamise kiirus (Seq. Write)
1800 MB/s
Peaaegu sama tähtis, kui lugemise kiirus, on kirjutamise (salvestamise) kiirus. Ka see parameeter määrab ära SSD ketta jõudluse, sellegipoolest, seetõttu, et kettale kirjutamine on harvem toiming,kui andmete lugemine, siis mistahes kiirus üle 100 MB/s keskmise suurusega kasutajale on subjektiivselt raskemini eristatav suurematest näitajatest, välja arvatud juhul, kui SSD ketast kasutate serveriks, heli/video salvestamiseks jmt.
Funktsionaalsus
Radiaatorid
: On
Valgustus
: Ei ole
Sadamad ja seadmed
Formaat
M.2 80mm (2280)
Tänu SSD-tehnoloogiast tulenevale väikesele suurusele on ketaste standardsuurus 2,5" ja see sobib keskmise kaasaskantava arvuti jaoks. Lauaarvutisse on võimalik paigaldada 2,5-tolline ketas, kui kasutada üleminekut 2,5" -> 3,5" ja seda üleminekut saab soodsalt osta TopPC.ee rubriigist "Adapteri". 2,5" + 3,5" formaadiga kettad on selle üleminekuga kaasas.
1,8" kettad on mõeldud ülikompaktse klassi kaasaskantavatele arvutitele.
PCI-Express SSD-d on mõeldud lauaarvutitele, kus on olemas vaba PCI-Express pistik. Seda tehnoloogiat kasutatakse enamasti selleks, et tagada muud tüüpi ühenduste võimalusi ületav jõudlus.
Liides
: PCIe 3.0 x4
Ühenduskoht
M.2
SSD kettad, mil on SATAII ja SATAIII liidesed, on ühitatavad mõlemat liiki liidestega emaplaadiga. Siiski peab võtma arvesse, et emaplaadi SATAII liides maksimaalselt suudab tagada ligikaudu 300 MB/s suurust läbilaskvust, mis SSD ketastel, millede lugemise ja/või kirjutamise kiirus ületab seda piiri, võib vähendada reaalset läbilaskvust kuni SATAII võimaluste piirini.
Sarnane olukord on PCI-Express ja SATAIII liidestega. Ehkki küll SATAIII standard suudab tagada kuni isegi 600 MB/s suuruse andmete läbilaskvuse, on kättesaadavad ka SSD kettad, millede kiirus ületab seda piiri, sel juhul tootja valib PCI-Express liidese, mil on suurem läbilaskevõime. PCI-Express ketast pole võimalik ühendada sülearvutiga.
Specifikācija
Mälutehnoloogia
: TLC (Triple-Level Cell)
Random Read IOPS
: 180K
Random Write IOPS
: 150K
Endurance (TBW)
: 260 TB
Täpsem spetsifikatsioon
Category - Root/Electronics/PC parts/Hard drives
Category Code - SSU
Category_1 - Hard Drives and Pendrives
Category_2 - Internal SSD - M.2
Code - ALEG-710-1TCS
Color - Not applicable
Depth - 80 mm
Description - LEGEND 710 Dysk LEGEND 710 obsługuje interfejs PCIe Gen 3x4 i NVMe 1.4, co przekłada się na szybkości długotrwałego odczytu i zapisu sięgające 2400/1800 MB na sekundę. Specyfikacja M.2 2280 zapewnia obsługę najnowszych platform Intel i AMD, zarówno w przypadku komputerów stacjonarnych, jak i laptopów.
Optymalne chłodzenie
Subtelny, ale elegancki wygląd radiatora dysku LEGEND 710 cechują odcienie królewskiego błękitu oraz wyjątkowe wykończenie w złotym kolorze. Radiator obniża temperaturę o 15%, zapewniając optymalną wydajność i stabilność.
Wsparcie w tworzeniu
Kreatywność nie może czekać! Dzięki buforowaniu SLC i technologii HMB (ang. Host Memory Buffer) dysk LEGEND 710 zapewnia niezakłóconą produktywność.
Bezpieczeństwo pracy twórczej
Dzięki technologii kodu LDPC (ang. Low Density Parity Check) i 256-bitowemu szyfrowaniu AES dysk LEGEND 710 zapewnia dokładność transmisji danych oraz bezpieczeństwo.
3-letnia gwarancja
W dyskach SSD z serii LEGEND stosowane są wyłącznie wysokiej jakości układy scalone, które przeszły rygorystyczne testy. Dyski są ponadto objęte 3-letnią gwarancją, która zapewni Ci spokój użytkowania.
Description - LEGEND 710 PCIe Gen3 x4 M.2 2280 Solid State Drive ? PCIe Gen3 x4 interface ? Excellent read/write performance ? Heat sink keeps things 15% cooler ? Great upgrade option for creators ? High capacities ? Supports NVMe 1.4 ? LDPC & AES 256-bit encryption ? Supports Host Memory Buffer(HMB)
Design > SSD form factor - M.2 2280
dimensionalWeight - 45
dimension depth - 15 mm
dimension height - 130 mm
Dimensions - 80 x 22 x 3.13mm
dimension weight - 31 g
dimension width - 105 mm
Disk type - SSD
Drive type - Internal
EAN - 4711085937841
ean - 4711085937841
Eans - 4711085937841
EAN_code - 4711085937841
Features - Component for - PC/Laptop
Features - ECC - Yes
Features - Hardware encryption - Yes
Features - Harmonized System (HS) code - 84717070
Features - Interface - PCI Express 3.0
Features - Mean time between failures (MTBF) - 1500000 h
Features - Memory type - 3D NAND
Features - NVMe - Yes
Features - NVMe version - 1.4
Features - PCI Express interface data lanes - x4
Features - Random read (4KB) - 180000 IOPS
Features - Random write (4KB) - 150000 IOPS
Features - Read speed - 2400 MB/s
Features - Security algorithms - 256-bit AES
Features - Sequential read speed (AS SSD) - 2400 MB/s
Features - Sequential read speed (ATTO) - 2400 MB/s
Features - Sequential read speed (CDM) - 2400 MB/s
Features - Sequential write speed (AS SSD) - 1800 MB/s
Features - Sequential write speed (ATTO) - 1800 MB/s
Features - Sequential write speed (CDM) - 1800 MB/s
Features - SSD capacity - 1 TB
Features - SSD form factor - M.2
Features - TBW rating - 260
Features - Write speed - 1800 MB/s
Form Factor - M.2
Form factor (width) - M.2 2280
Full Description Line - SSD series LEGEND 710|1TB|Form Factor M.2|PCIE|NVMe|Technology 3D NAND|Write speed 1800 MBytes/sec|Read speed 2400 MBytes/sec|TBW 260 TB|MTBF 1500000 hours
guarantee - 36
guarantee_type - normal
HDD capacity - 1 TB
HDD interface - PCI-Express
Height - 2.15 mm
Link - https://www.adata.com/us/consumer/solid-state-drives-LEGEND-710?tab=specification
Manufacturer - ADATA
Manufacturer_code - ALEG-710-1TCS
Model - LEGEND 710
MTBF - 1.5e+006 hours
Name - ADATA LEGEND 710 1 TB, SSD (blue/gold, PCIe 3.0 x4, NVMe 1.4, M.2 2280)
Name - Adata LEGEND 710 M.2 PCIe NVMe 1TB
Name - ADATA | LEGEND 710 | 1000 GB | SSD form factor M.2 2280 | Solid-state drive interface PCIe Gen3x4 | Read speed 2400 MB/s | Write speed 1800 MB/s
name - SSD drive LEGEND 710 1TB PCIe 3x4 2.4/1.8 GB/s M2
NAND flash technology - 3D NAND
NVMe - Yes
Operational conditions - Maximum operating temperature - 70 °C
Operational conditions - Operating shock - 1500 G
Operational conditions - Operating temperature (T-T) - 0 - 70 °C
Operational conditions - Storage temperature (T-T) - -40 - 85 °C
Other features - Wymiary z radiatorem: 3,13 x 22 x 80 mm Waga z radiatorem: 9 g
Package features > Embeeded battery - No
Package features > Gross depth (mm) - 17 mm
Package features > Gross height (mm) - 130 mm
Package features > Gross width (mm) - 104 mm
Package features > Packing quantity - 1.00 pc(s)
Package features > Palette Qty - 7518 pc(s)
Package features > Paper/Pasteboard - 14 g
Package features > PET - 20.00 g
Package features > Plastic (No PET) - 10.00 g
Package features > Tare weight (kg) - 0.024 kg
Package features > Volume (m3) - 0.00022984 m³
Package features > WEE classification - CL109:6:2017-04-01
Package features > WEEE tax - Yes
Packaging data - Package type - Box
PCIE Interface - Yes
Performance > Read speed - 2400 MB/s
Performance > Solid-state drive capacity - 1000 GB
Performance > Solid-state drive interface - PCIe Gen3x4
Performance > Write speed - 1800 MB/s
producer - Adata
Producer - Adata
producerCode - ALEG-710-1TCS
ProducerCode - ALEG-710-1TCS
Producer product name - LEGEND 710
productName - ADATA LEGEND 710 M.2 1000 GB PCI Express 3.0 3D NAND NVMe
productSize - Normal
Random read IOPS (max) - 180 K
Random write IOPS (max) - 150 K
Reading speed - 2400 MB/s
Read speed - 2400 MBytes/sec
Shipping Box Depth Shipping/Package Box Dimensions - 13 cm
Shipping Box Height Shipping/Package Box Dimensions - 10.5 cm
Shipping box quantity - 1
Shipping Box Weight Shipping/Package Box Dimensions - 0.032 kg
Shipping Box Width Shipping/Package Box Dimensions - 2 cm
ShortDescription - SSD | 1TB | 2400/1800 MB/s | M.2 | 2280 | PCI-E 3x4|3D NAND | gwarancja ograniczona parametrem TBW
sizeX - 130
sizeY - 17
sizeZ - 103
SSD Capacity - 1TB
SSD series - LEGEND 710
TBW - 260 TB
TBW - 260 TB
Technical details - Sustainability certificates - CE
Technical details - Sustainability certificates - RoHS
Technical details > Gross weight - 0.031 kg
Technical details > NAND flash component - 3D NAND
Technical details > Net weight - 0.007 kg
Technical details > Other features - The heat sink works to keep temperatures down by 15% for optimal performance and stability
Technical details > Producer - ADATA
Technical details > Warranty - 60 month(s)
Technical_details - LEGEND 710 1TB, SSD The ADATA LEGEND 710 SSD uses the PCIe 3.0 x4 interface with NVMe 1.4 specification to offer high performance for creative expression. With read/write speeds of up to 2,400/1,800 MB/s, the LEGEND 710 is significantly faster than SATA SSDs. The LEGEND 710 is also equipped with SLC caching and HMB (Host Memory Buffer) for uninterrupted productivity. The LEGEND 710's understated yet elegant heatsink design features a royal blue color scheme with gold-tone trim. The heatsink reduces temperatures by up to 15% for optimal performance and stability. Type: SSD Colour: blue/gold EAN: 4711085937841 Manufacturer No.: ALEG-710-1TCS Series: LEGEND 710 Design: plug-in card Capacity: 1TB Interface: 1x M.2 (M.2 module key: M) Internal interface: PCIe 3.0 Data transfer rate: Read | 2,400MB/s Data transfer rate: Write | 1,800MB/s IOPS: Read | 180,000 IOPS: Write | 150,000 MTBF: 1,500,000 hours TBW: 260TB Feature: Heatsink, SLC Caching, HMB, LDPC ECC, AES 256-bit Encryption Dimensions: Width: 22mm x Height: 3.13mm x Depth/Length: 80mm Weight: 9 grams
Unit Box Height - 0.105
Unit Box Length - 0.13
Unit Box Width - 0.02
Unit Brutto Volume - 0.000273 cubm
Unit Gross Weight - 0.032 kg
Unit Net Weight - 0.009 kg
Vendor Homepage - www.adata.com/us/consumer/solid-state-drives-LEGEND-710
vendpn - ALEG-710-1TCS
Warranty - 36L months
Warranty - 60
warrantyLength - 36
warrantyType - G
Weight - 0,03
Weight - 6.2 g
weight - 30
Weight & dimensions - Depth - 80 mm
Weight & dimensions - Height - 3.13 mm
Weight & dimensions - Weight - 9 g
Weight & dimensions - Width - 22 mm
Width - 22 mm
Write speed - 1800 MBytes/sec
Writing speed - 1800 MB/s
Category Code - SSU
Category_1 - Hard Drives and Pendrives
Category_2 - Internal SSD - M.2
Code - ALEG-710-1TCS
Color - Not applicable
Depth - 80 mm
Description - LEGEND 710 Dysk LEGEND 710 obsługuje interfejs PCIe Gen 3x4 i NVMe 1.4, co przekłada się na szybkości długotrwałego odczytu i zapisu sięgające 2400/1800 MB na sekundę. Specyfikacja M.2 2280 zapewnia obsługę najnowszych platform Intel i AMD, zarówno w przypadku komputerów stacjonarnych, jak i laptopów.
Optymalne chłodzenie
Subtelny, ale elegancki wygląd radiatora dysku LEGEND 710 cechują odcienie królewskiego błękitu oraz wyjątkowe wykończenie w złotym kolorze. Radiator obniża temperaturę o 15%, zapewniając optymalną wydajność i stabilność.
Wsparcie w tworzeniu
Kreatywność nie może czekać! Dzięki buforowaniu SLC i technologii HMB (ang. Host Memory Buffer) dysk LEGEND 710 zapewnia niezakłóconą produktywność.
Bezpieczeństwo pracy twórczej
Dzięki technologii kodu LDPC (ang. Low Density Parity Check) i 256-bitowemu szyfrowaniu AES dysk LEGEND 710 zapewnia dokładność transmisji danych oraz bezpieczeństwo.
3-letnia gwarancja
W dyskach SSD z serii LEGEND stosowane są wyłącznie wysokiej jakości układy scalone, które przeszły rygorystyczne testy. Dyski są ponadto objęte 3-letnią gwarancją, która zapewni Ci spokój użytkowania.
Description - LEGEND 710 PCIe Gen3 x4 M.2 2280 Solid State Drive ? PCIe Gen3 x4 interface ? Excellent read/write performance ? Heat sink keeps things 15% cooler ? Great upgrade option for creators ? High capacities ? Supports NVMe 1.4 ? LDPC & AES 256-bit encryption ? Supports Host Memory Buffer(HMB)
Design > SSD form factor - M.2 2280
dimensionalWeight - 45
dimension depth - 15 mm
dimension height - 130 mm
Dimensions - 80 x 22 x 3.13mm
dimension weight - 31 g
dimension width - 105 mm
Disk type - SSD
Drive type - Internal
EAN - 4711085937841
ean - 4711085937841
Eans - 4711085937841
EAN_code - 4711085937841
Features - Component for - PC/Laptop
Features - ECC - Yes
Features - Hardware encryption - Yes
Features - Harmonized System (HS) code - 84717070
Features - Interface - PCI Express 3.0
Features - Mean time between failures (MTBF) - 1500000 h
Features - Memory type - 3D NAND
Features - NVMe - Yes
Features - NVMe version - 1.4
Features - PCI Express interface data lanes - x4
Features - Random read (4KB) - 180000 IOPS
Features - Random write (4KB) - 150000 IOPS
Features - Read speed - 2400 MB/s
Features - Security algorithms - 256-bit AES
Features - Sequential read speed (AS SSD) - 2400 MB/s
Features - Sequential read speed (ATTO) - 2400 MB/s
Features - Sequential read speed (CDM) - 2400 MB/s
Features - Sequential write speed (AS SSD) - 1800 MB/s
Features - Sequential write speed (ATTO) - 1800 MB/s
Features - Sequential write speed (CDM) - 1800 MB/s
Features - SSD capacity - 1 TB
Features - SSD form factor - M.2
Features - TBW rating - 260
Features - Write speed - 1800 MB/s
Form Factor - M.2
Form factor (width) - M.2 2280
Full Description Line - SSD series LEGEND 710|1TB|Form Factor M.2|PCIE|NVMe|Technology 3D NAND|Write speed 1800 MBytes/sec|Read speed 2400 MBytes/sec|TBW 260 TB|MTBF 1500000 hours
guarantee - 36
guarantee_type - normal
HDD capacity - 1 TB
HDD interface - PCI-Express
Height - 2.15 mm
Link - https://www.adata.com/us/consumer/solid-state-drives-LEGEND-710?tab=specification
Manufacturer - ADATA
Manufacturer_code - ALEG-710-1TCS
Model - LEGEND 710
MTBF - 1.5e+006 hours
Name - ADATA LEGEND 710 1 TB, SSD (blue/gold, PCIe 3.0 x4, NVMe 1.4, M.2 2280)
Name - Adata LEGEND 710 M.2 PCIe NVMe 1TB
Name - ADATA | LEGEND 710 | 1000 GB | SSD form factor M.2 2280 | Solid-state drive interface PCIe Gen3x4 | Read speed 2400 MB/s | Write speed 1800 MB/s
name - SSD drive LEGEND 710 1TB PCIe 3x4 2.4/1.8 GB/s M2
NAND flash technology - 3D NAND
NVMe - Yes
Operational conditions - Maximum operating temperature - 70 °C
Operational conditions - Operating shock - 1500 G
Operational conditions - Operating temperature (T-T) - 0 - 70 °C
Operational conditions - Storage temperature (T-T) - -40 - 85 °C
Other features - Wymiary z radiatorem: 3,13 x 22 x 80 mm Waga z radiatorem: 9 g
Package features > Embeeded battery - No
Package features > Gross depth (mm) - 17 mm
Package features > Gross height (mm) - 130 mm
Package features > Gross width (mm) - 104 mm
Package features > Packing quantity - 1.00 pc(s)
Package features > Palette Qty - 7518 pc(s)
Package features > Paper/Pasteboard - 14 g
Package features > PET - 20.00 g
Package features > Plastic (No PET) - 10.00 g
Package features > Tare weight (kg) - 0.024 kg
Package features > Volume (m3) - 0.00022984 m³
Package features > WEE classification - CL109:6:2017-04-01
Package features > WEEE tax - Yes
Packaging data - Package type - Box
PCIE Interface - Yes
Performance > Read speed - 2400 MB/s
Performance > Solid-state drive capacity - 1000 GB
Performance > Solid-state drive interface - PCIe Gen3x4
Performance > Write speed - 1800 MB/s
producer - Adata
Producer - Adata
producerCode - ALEG-710-1TCS
ProducerCode - ALEG-710-1TCS
Producer product name - LEGEND 710
productName - ADATA LEGEND 710 M.2 1000 GB PCI Express 3.0 3D NAND NVMe
productSize - Normal
Random read IOPS (max) - 180 K
Random write IOPS (max) - 150 K
Reading speed - 2400 MB/s
Read speed - 2400 MBytes/sec
Shipping Box Depth Shipping/Package Box Dimensions - 13 cm
Shipping Box Height Shipping/Package Box Dimensions - 10.5 cm
Shipping box quantity - 1
Shipping Box Weight Shipping/Package Box Dimensions - 0.032 kg
Shipping Box Width Shipping/Package Box Dimensions - 2 cm
ShortDescription - SSD | 1TB | 2400/1800 MB/s | M.2 | 2280 | PCI-E 3x4|3D NAND | gwarancja ograniczona parametrem TBW
sizeX - 130
sizeY - 17
sizeZ - 103
SSD Capacity - 1TB
SSD series - LEGEND 710
TBW - 260 TB
TBW - 260 TB
Technical details - Sustainability certificates - CE
Technical details - Sustainability certificates - RoHS
Technical details > Gross weight - 0.031 kg
Technical details > NAND flash component - 3D NAND
Technical details > Net weight - 0.007 kg
Technical details > Other features - The heat sink works to keep temperatures down by 15% for optimal performance and stability
Technical details > Producer - ADATA
Technical details > Warranty - 60 month(s)
Technical_details - LEGEND 710 1TB, SSD The ADATA LEGEND 710 SSD uses the PCIe 3.0 x4 interface with NVMe 1.4 specification to offer high performance for creative expression. With read/write speeds of up to 2,400/1,800 MB/s, the LEGEND 710 is significantly faster than SATA SSDs. The LEGEND 710 is also equipped with SLC caching and HMB (Host Memory Buffer) for uninterrupted productivity. The LEGEND 710's understated yet elegant heatsink design features a royal blue color scheme with gold-tone trim. The heatsink reduces temperatures by up to 15% for optimal performance and stability. Type: SSD Colour: blue/gold EAN: 4711085937841 Manufacturer No.: ALEG-710-1TCS Series: LEGEND 710 Design: plug-in card Capacity: 1TB Interface: 1x M.2 (M.2 module key: M) Internal interface: PCIe 3.0 Data transfer rate: Read | 2,400MB/s Data transfer rate: Write | 1,800MB/s IOPS: Read | 180,000 IOPS: Write | 150,000 MTBF: 1,500,000 hours TBW: 260TB Feature: Heatsink, SLC Caching, HMB, LDPC ECC, AES 256-bit Encryption Dimensions: Width: 22mm x Height: 3.13mm x Depth/Length: 80mm Weight: 9 grams
Unit Box Height - 0.105
Unit Box Length - 0.13
Unit Box Width - 0.02
Unit Brutto Volume - 0.000273 cubm
Unit Gross Weight - 0.032 kg
Unit Net Weight - 0.009 kg
Vendor Homepage - www.adata.com/us/consumer/solid-state-drives-LEGEND-710
vendpn - ALEG-710-1TCS
Warranty - 36L months
Warranty - 60
warrantyLength - 36
warrantyType - G
Weight - 0,03
Weight - 6.2 g
weight - 30
Weight & dimensions - Depth - 80 mm
Weight & dimensions - Height - 3.13 mm
Weight & dimensions - Weight - 9 g
Weight & dimensions - Width - 22 mm
Width - 22 mm
Write speed - 1800 MBytes/sec
Writing speed - 1800 MB/s
